NEC LCD1990FXTM OSM Lockout, Sel, Brightness, Contrast, Eco Mode,Warning, Signal, Information

Advanced OSM Controls – continued

Tag 6	OSM LOCKOUT	2: OSM LOCK OUT with no control: This mode prevents access
continued	continued	to all OSM functions. To activate, press the SELECT and
		“Right” buttons simultaneously. To deactivate, press the SELECT
		and “Right” buttons simultaneously, while in the OSM menu.
		3: OSM LOCK OUT with BRIGHTNESS (only) control: This
		mode locks all OSM functions except for BRIGHTNESS.
		To activate, press the SELECT, “Left” and “Down” buttons
		simultaneously, while in the OSM menu.
		To deactivate, press SELECT, “Left” and “Down” buttons
		simultaneously, while in the OSM menu.
		4: CUSTOM: Press RESET and EXIT to enter the CUSTOM
		Menu. Select ENABLE or DISABLE for: POWER KEY, INPUT
		SEL, BRIGHTNESS, CONTRAST, ECO MODE,WARNING.
		To Deactivate the OSM Lock Out function, press RESET and
		EXIT to bring up the LOCK OUT warning. Press SELECT,
		SELECT, <, >, <, >, EXIT.
	SIGNAL	Signal information can be displayed in the corner of the screen.
	INFORMATION	Signal information is either “ON/OFF”.
	RESOLUTION	The Resolution Notifier warns the user if the input to the monitor
	NOTIFIER	is set to something other than the optimized resolution of
		1280 x 1024. If the monitor detects a signal that is not at the
		optimized resolution, after 45 seconds a warning message will
		appear on the screen. The Resolution Notifier is set to ON by
		default.
Tag 7	INFORMATION	Provides information about the current display resolution Techni-
		cal data, including the preset timing currently being used and
		the horizontal and vertical frequencies is also displayed.

20