Network Settings
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To change this setting:
1.Choose IP Network Settings from the Main Menu, then Time (SNTP).
2.Choose SNTP Time Synch Rate, then specify:
•Hourly
•Daily
3.Choose Time Server, then specify the new time server, if desired.
4.Choose Time Zone, select a region from the list and then select a time zone.
Table 14 Time Server parameters
Parameter | Description & Telnet Menus | |
|
| |
SNTP Time Sync Rate | This is how often the card will attempt to synchronize its internal clock with the specified | |
time server. | ||
| ||
Time Server | This is the server that will be used for synchronization. This can be either an IP address | |
or a hostname, provided that the DNS options are configured. | ||
| ||
Time Zone | This is the local Time Zone that will be used to correctly adjust the time provided by the | |
server for the locale where the Web Card is being used. | ||
|
Web Interface
To access Time (SNTP) settings through the Web interface:
Click on the Configure tab, then Network Settings in the left panel and finally Edit in the right panel. After making changes, click Save.
Configure tab
Time
Server list
Click on Edit |
|
|
| Time |
|
|
| ||
to choose |
|
|
| |
options |
|
|
| Servers |
|
|
|
| must be |
|
|
|
| entered |
|
|
|
| manually |
Time zones available from list
25