Emerson IS-WEB485ADPT installation manual SMS configuration guide

Page 35

Messaging

Terminal Emulation (Serial or TCP/IP Connection) / Telnet

To activate and set up SMS messages:

1. Choose Messaging from the Main Menu, then SMS.

Enable SMS [y/n] ?>

2.To enable the SMS feature, enter y (yes) at the prompt.

3.Choose SMS Configuration from the Messaging Menu, then select an option and use the following guide to make changes.

Table 20 SMS configuration guide

Parameter

Description

Maximum

 

 

 

SMS From

The e-mail address of the sender—for example, support@company.com

64

typically, the address where replies should be sent.

characters

 

 

The message will be sent to this list of addresses. The SMS/Text Message

 

 

address is usually a 10-digit phone number followed by @____.com (where ____

 

SMS Message

might be a company name). To add an SMS address, use the format

64

a 1112223333@abc.com. Multiple addresses must be added individually.

Recipients

characters

Changes may be made by entering d to delete an entry or e to edit an entry.

 

 

 

NOTE: To specify multiple recipients of the SMS message in the Web interface,

 

 

use a semicolon (;) to separate addresses in the SMS To box.

 

SMS Subject

The subject line of the message. By default, this is the event description—e.g.,

120

AlarmOnBypass—but it may be customized.

characters

 

SMS Customize

The text of the message sent to e-mail recipients. Choose from a list of items to

Message

include in the message. For details, see 6.3 - Customize Messages.

 

SMTP Server

The IP address or domain name of the SMTP e-mail server that sends messages.

32

characters

 

 

Port

SMTP server port—typically the default port, 25.

 

 

 

Test SMS

After saving changes to SMS parameters, send a test SMS message to verify the

settings are correct. The message status will be displayed.

 

 

View Test

Choose this option to display a log showing the results of test messages.

SMS Log File

 

 

Web Interface

To access SMS Configuration through the Web interface:

Click on the Configure tab, then SMS in the left panel and finally Edit in the right panel. After making changes, click Save.

Configure tab

Edit

SMS

31

Image 35
Contents Liebert IntelliSlot Web Cards Page Table of Contents Support Information TablesImportant Safety Instructions Liebert IntelliSlot card communication protocols Compatibility With Liebert EquipmentIntroduction Liebert Nform Support Password ProtectionWeb Support Snmp SupportCommunication settings Install a Liebert IntelliSlot Web Card-Non-Adapter VersionInstallation Prepare the Card for ConfigurationSelect Enabled Application Install a Liebert IntelliSlot Web/485 Card With AdapterGuide to configuration details Guide to ConfigurationConfiguration Overview Configuration interfacesName Connection settingsOpen the Terminal Emulation Interface Serial Connection Winsock Open the Terminal Emulation Interface TCP/IP ConnectionTelnet Open the Telnet InterfaceWeb Interface Open the Web InterfaceSaving Changes and Reinitializing the Web Card Terminal Emulation Serial or TCP/IP Connection / TelnetSystem information identifiers System InformationNetwork Settings menu guide Network SettingsBoot/IP settings range Boot/IP SettingsDomain Name Server settings Domain Name Server DNS SettingsManagement protocol ranges Management ProtocolWeb Interface Snmp communications menu Snmp Communications MenuDisplay/Modify Communities 10.0.0.7 read public2 Display/Modify Trap CommunitiesWeb Server Specify Web Server SettingsWeb server settings Certificate Path tab View Click on View CertificateAutomatically select Install CertificateContinue to this website Install Security Certificates Internet Explorer 7 or laterCertificate Error View Certificates Certificate Import Wizard opens. Click Next Time Sntp Menu Configure tab Edit TelnetTelnet Server Sntp Time Sync Rate Time Server parametersUsername and password guidelines Change Username / PasswordFactory default passwords Reset Authentication to Factory Defaults Messaging menu guide Configure tab Edit MessagingMessaging Mail configuration guide Mail ConfigurationConfigure tab Edit SMS ConfigurationSMS configuration guide Mail and SMS message guidelines Customize MessagesTerminal Emulation Serial or TCP/IP Connec- tion / Telnet Message Consolidation Time Limit Configure tab Edit Customize MessageConfigure tab Factory Defaults Reset To Factory Defaults Reset to Factory DefaultsFactory Settings Factory default MAC addresses Liebert DS Local Node Settings for Multiple CardsWeb Interface Only Monitoring Liebert EquipmentMonitor and Control Functions WEB only Liebert GXT2U example Output DS example Setpoints Controlling Liebert EquipmentControl tab Control Operations Click to view in right panel Scroll through Event Log tab Event LogEvent Log Controls LinksSupport tab Listing in right panel Summary View Web Card InformationSupport Information Support tab Listing in right panel Events or Parameters Events and ParametersOverview Appendix a Firmware Updates IntroductionEstimated Time to Download the Firmware Upgrade File Table A1 Overview of the upgrade processOpen the Terminal Emulation Interface TCP/IP Connection Table A3 Communication settingsOpen the Terminal Emulation Interface Serial Connection Open the Web Interface Open the Telnet InterfaceDownload the Firmware Upgrade File to the Computer Updating the Firmware Http WEB Method Choose a Method to Install the Firmware UpgradeInstall the Firmware Upgrade Reconnect to the Card Specify Tftp Server and Upgrade FilenameTable A4 Firmware update settings Tftp Open a Connection to the CardTftp Method Web Interface Begin the Upgrade ProcessTable A5 Firmware update settings Web Updating the Firmware Xmodem Serial Method Change the Baud Rate to 115200 bps Call menu Configure buttonConnect a Cable to the Serial Ports Open a Terminal Emulation ConnectionDownload the Second and Third Firmware Update Files Download the First Firmware Update FileCall menu 9600 bps Configure button Complete the Upgrade and Restore Communication RateUpdating the Firmware Xmodem Serial Method A13 Updating the Firmware Xmodem Serial Method A14 Page That Ne tIti Ti n