Emerson IS-WEB485ADPT installation manual Customize Messages, Mail and SMS message guidelines

Page 36

Messaging

6.3Customize Messages

Both e-mail and SMS text messages may be custom- ized to include items such as the IP address or host- name, event name and a link to the Web card in the body of the message.

Terminal Emulation (Serial or TCP/IP Connec- tion) /Telnet

1.Choose Messaging from the Main Menu, then Email Configuration (or SMS Configuration).

Email/SMS Customize Message Menu

 

--------------------------------

 

1: IP Address

'enabled'

2: Event

'enabled'

3: Event Date & Time

'disabled'

4: Name

'enabled'

5: Contact

'enabled'

6: Location

'enabled'

7: Description

'enabled'

8: Web link & Port

'disabled'

9: Event Consolidation

'enabled'

A: Consolidation Time Limit (seconds)

60

B: Consolidation Event Limit

30

<ESC>: Cancel menu level

 

Please select a key ?>

 

 

 

2.Choose Email (or SMS) Customize Message from the Configuration menu.

3.Choose an option from the Email (or SMS) Customize Message Menu, then enter y (yes) at the prompt to confirm your choice. Repeat for each item to be included in messages. Refer to the following guidelines to make changes:

Table 21 E-mail and SMS message guidelines

Parameter

Description—if enabled, outgoing messages will include:

 

Defined in:

 

 

 

 

IP address or

The IP Address or Hostname of the Web card

5.1

- Boot/IP Settings

hostname

 

 

 

Event

Description of the SNMP event

9.0

- Support Information

Event Date

The date & time when the SNMP event occurred

 

& Time

 

 

 

 

Name

The name for the Liebert unit

4.0

- System Information

Contact

The contact person or department

4.0

- System Information

Location

The location of the Liebert unit

4.0

- System Information

Description

Other information about the Liebert unit

4.0

- System Information

Web Link & Port

A clickable link to the Web card through the Web interface

5.1

- Boot/IP Settings

The port number of the SMTP server port

6.1

- E-Mail Configuration

 

6.2

- SMS Configuration

 

 

Event

Enable or disable consolidation of events for e-mail/SMS

6.1

- E-Mail Configuration

Consolidation

notification

6.2

- SMS Configuration

Consolidation

Duration (in seconds) to consolidate events before sending a

Message Consolidation

Time Limit

notification. Notification will be sent when this threshold is

Time Limit on page 33

(seconds)

reached, regardless of event limit. Range: 10 to 120.

 

 

Consolidation

Number of events to consolidate before sending a notification.

Message Consolidation

Event Limit

Notification will be sent when this threshold is reached,

Time Limit on page 33

 

regardless of time limit. Range: 1 to 50.

 

 

 

 

 

 

 

32

Image 36
Contents Liebert IntelliSlot Web Cards Page Table of Contents Tables Support InformationImportant Safety Instructions Compatibility With Liebert Equipment IntroductionLiebert IntelliSlot card communication protocols Password Protection Web SupportSnmp Support Liebert Nform SupportInstall a Liebert IntelliSlot Web Card-Non-Adapter Version InstallationPrepare the Card for Configuration Communication settingsInstall a Liebert IntelliSlot Web/485 Card With Adapter Select Enabled ApplicationGuide to Configuration Configuration OverviewConfiguration interfaces Guide to configuration detailsConnection settings Open the Terminal Emulation Interface Serial ConnectionName Open the Terminal Emulation Interface TCP/IP Connection WinsockOpen the Telnet Interface TelnetOpen the Web Interface Saving Changes and Reinitializing the Web CardTerminal Emulation Serial or TCP/IP Connection / Telnet Web InterfaceSystem Information System information identifiersNetwork Settings Network Settings menu guideBoot/IP Settings Boot/IP settings rangeDomain Name Server DNS Settings Domain Name Server settingsManagement Protocol Management protocol rangesWeb Interface Snmp Communications Menu Display/Modify CommunitiesSnmp communications menu Display/Modify Trap Communities 10.0.0.7 read public2Specify Web Server Settings Web server settingsWeb Server Click on View Certificate Certificate Path tab ViewInstall Certificate Automatically selectInstall Security Certificates Internet Explorer 7 or later Certificate Error View CertificatesContinue to this website Certificate Import Wizard opens. Click Next Configure tab Edit Telnet Telnet ServerTime Sntp Menu Time Server parameters Sntp Time Sync RateChange Username / Password Factory default passwordsUsername and password guidelines Reset Authentication to Factory Defaults Configure tab Edit Messaging MessagingMessaging menu guide Mail Configuration Mail configuration guideSMS Configuration Configure tab EditSMS configuration guide Customize Messages Terminal Emulation Serial or TCP/IP Connec- tion / TelnetMail and SMS message guidelines Configure tab Edit Customize Message Message Consolidation Time LimitReset to Factory Defaults Factory SettingsConfigure tab Factory Defaults Reset To Factory Defaults Liebert DS Local Node Settings for Multiple Cards Factory default MAC addressesMonitoring Liebert Equipment Monitor and Control Functions WEB onlyWeb Interface Only Controlling Liebert Equipment Control tab Control Operations Click to view in right panelLiebert GXT2U example Output DS example Setpoints Event Log Event Log ControlsLinks Scroll through Event Log tabView Web Card Information Support InformationSupport tab Listing in right panel Summary Events and Parameters Support tab Listing in right panel Events or ParametersAppendix a Firmware Updates Introduction Estimated Time to Download the Firmware Upgrade FileTable A1 Overview of the upgrade process OverviewTable A3 Communication settings Open the Terminal Emulation Interface Serial ConnectionOpen the Terminal Emulation Interface TCP/IP Connection Open the Telnet Interface Open the Web InterfaceDownload the Firmware Upgrade File to the Computer Choose a Method to Install the Firmware Upgrade Install the Firmware UpgradeUpdating the Firmware Http WEB Method Specify Tftp Server and Upgrade Filename Table A4 Firmware update settings TftpOpen a Connection to the Card Reconnect to the CardBegin the Upgrade Process Tftp Method Web InterfaceTable A5 Firmware update settings Web Updating the Firmware Xmodem Serial Method 115200 bps Call menu Configure button Connect a Cable to the Serial PortsOpen a Terminal Emulation Connection Change the Baud Rate toDownload the First Firmware Update File Download the Second and Third Firmware Update FilesComplete the Upgrade and Restore Communication Rate Call menu 9600 bps Configure buttonUpdating the Firmware Xmodem Serial Method A13 Updating the Firmware Xmodem Serial Method A14 Page Ne t ItiTi n That