Emerson IS-WEB485ADPT installation manual Reset to Factory Defaults, Factory Settings

Factory Settings

7.0FACTORY SETTINGS

Factory default values may be restored for all configuration settings. This step:

•Replaces all user-defined settings described in this manual (see 3.0 - Configuration Overview through 6.0 - Messaging)

•Restores DHCP service, the factory default, replacing a static IP address or hostname, if config- ured during installation (see 2.0 - Installation)

7.1Reset to Factory Defaults

Terminal Emulation (Serial or TCP/IP Connection) / Telnet

To restore the factory default settings:

1.Choose Factory Settings from the Main Menu, then choose Reset to Factory Defaults.

Reset to factory Defaults? [y/n] ?>

Factory Settings Menu

----------------------

1:Reset to Factory Defaults

2:Agent Card Information

<ESC>: Cancel menu level

Please select a key ?>

2.Enter y (yes) at the prompt to confirm your choice. To cancel, enter n (no).

3.A message appears until the process is complete.

Resetting card to factory defaults...

Web Interface

To restore the factory default settings through the Web interface:

•Click on the Configure tab, then Factory Defaults in the left panel and finally Reset to Fac- tory Defaults in the right panel.

Configure tab

Factory

Defaults

Reset

to Factory Defaults

34