Emerson IS-WEB485ADPT installation manual Download the First Firmware Update File

Updating the Firmware - Xmodem (Serial) Method

Download the First Firmware Update File

12.After changing the communication rate to 115200 bps, press Enter to resume the firmware update.

After you press Enter, HyperTerminal displays Cs as it counts down the time remaining to locate and begin transferring the upgrade files.

NOTE

After you begin the initialization process in Step 12, you must complete Steps 13 through 15 within 60 seconds. Before beginning, check to ensure that you know the location of the firmware files and read through the following steps to understand what needs to be done.

This 60-second limit also applies to downloading the second and third upgrade files.

13. In the HyperTerminal menu, click on Transfer, then Send File.

Browse to locate upgrade file

		Progress	... and
Press Enter to start		window	remaining
	Choose	shows	time
firmware update	1K Xmodem	elapsed time...

14.Click the Browse button to locate an upgrade file. Select the files in order—the filename ending in FILE1 for the first download, then FILE2, and finally FILE3—then click Open.

15.In the Send File window, choose 1K Xmodem from the Protocol drop-down list and click Send.

A progress window opens, showing the elapsed time and amount of time remaining for the first file to be downloaded to the Liebert IntelliSlot card. The window closes after the first file is down- loaded.

NOTE

Do not press any keys while the progress window remains open or the download will abort.

Download the Second and Third Firmware Update Files

16.When the progress window closes, enter y (yes) in HyperTerminal to continue the upgrade.

17.Choose Xmodem1K in the Select Firmware Update Protocol menu.

18.The screen shows that the communication rate is 115200. This does not need to be changed.

19.Press Enter to continue.

20.Repeat Steps 12 through 15 within the 60-second limit to browse to the second upgrade file and download it to the Liebert IntelliSlot card.

21.Wait for the Progress window to close after the second file is downloaded.

Then repeat Steps 16 through 20 to download the third upgrade file. This file is the largest and may take 30 minutes or longer to download.

Would You Like to Continue (Y or N)?

Firmware Update (Step 2/3)

--------------------------

Select Firmware Update Protocol

-------------------------------

1:XmodemCrc

2:Xmodem1K x: Exit/Cancel

Please select a key ?>

Current Communications Rate is 115200 bps.

Press a number to Change Communications Rate.

-------------------------------

1:9600 bps

2:19200 bps

3:38400 bps

4:57600 bps

5:115200 bps

Enter: Accept/Start Firmware Update Please select a key >

Press Enter to Start Firmware Update.

A11