Emerson IS-WEB485ADPT installation manual Change Username / Password, Factory default passwords

Page 30

Network Settings

5.7Change Username / Password

The Web card is designed for two types of access, each with a default user name and password. For security, be sure to change the default password.

Table 15 Factory default passwords

Type of User

Factory Default

Description

 

 

 

 

Administrator

Username

Liebert

Full access to configuration and control

Password

Liebert

functions, as well as viewing privileges

 

 

 

 

 

General User

Username

User

Viewing privileges only—no access to

Password

User

configuration or control functions

 

 

 

 

 

Follow these guidelines to change the user name and password.

Table 16 Username and password guidelines

Maximum length

32 characters (6 or more characters recommended)

 

 

Valid characters

Any printable character EXCEPT colon, tab, double quote, question mark

 

 

Upper/lowercase

Case-sensitive—letters must be uppercase or lowercase as entered

 

 

Tips

Avoid common names, words and phrases as passwords

 

 

Terminal Emulation (Serial or TCP/IP Connection) / Telnet

To change the Administrator or General user name or password:

1.Choose IP Network Settings from the Main Menu, then choose either:

Change Administrator Username/Password or

Change General Username/Password

2.Enter a user name—the current user name is shown in brackets.

Enter Administrator Username, press enter for [Liebert]: (Max 32 chars) ?>

3. Enter a password, then verify by typing the password again.

Enter New Password: (Max 32 chars) ?> ********

Verify Password: ?> ********

Web Interface

To access usernames and passwords through the Web interface:

Click on the Configure tab, then Users in the left panel and finally Edit in the right panel. After making changes, click Save.

Configure tab

Edit

Users

26

Image 30
Contents Liebert IntelliSlot Web Cards Page Table of Contents Tables Support InformationImportant Safety Instructions Compatibility With Liebert Equipment IntroductionLiebert IntelliSlot card communication protocols Snmp Support Password ProtectionWeb Support Liebert Nform SupportPrepare the Card for Configuration Install a Liebert IntelliSlot Web Card-Non-Adapter VersionInstallation Communication settingsInstall a Liebert IntelliSlot Web/485 Card With Adapter Select Enabled ApplicationConfiguration interfaces Guide to ConfigurationConfiguration Overview Guide to configuration detailsConnection settings Open the Terminal Emulation Interface Serial ConnectionName Open the Terminal Emulation Interface TCP/IP Connection WinsockOpen the Telnet Interface TelnetTerminal Emulation Serial or TCP/IP Connection / Telnet Open the Web InterfaceSaving Changes and Reinitializing the Web Card Web InterfaceSystem Information System information identifiersNetwork Settings Network Settings menu guideBoot/IP Settings Boot/IP settings rangeDomain Name Server DNS Settings Domain Name Server settingsManagement Protocol Management protocol rangesWeb Interface Snmp Communications Menu Display/Modify CommunitiesSnmp communications menu Display/Modify Trap Communities 10.0.0.7 read public2Specify Web Server Settings Web server settingsWeb Server Click on View Certificate Certificate Path tab ViewInstall Certificate Automatically selectInstall Security Certificates Internet Explorer 7 or later Certificate Error View CertificatesContinue to this website Certificate Import Wizard opens. Click Next Configure tab Edit Telnet Telnet ServerTime Sntp Menu Time Server parameters Sntp Time Sync RateChange Username / Password Factory default passwordsUsername and password guidelines Reset Authentication to Factory Defaults Configure tab Edit Messaging MessagingMessaging menu guide Mail Configuration Mail configuration guideSMS Configuration Configure tab EditSMS configuration guide Customize Messages Terminal Emulation Serial or TCP/IP Connec- tion / TelnetMail and SMS message guidelines Configure tab Edit Customize Message Message Consolidation Time LimitReset to Factory Defaults Factory SettingsConfigure tab Factory Defaults Reset To Factory Defaults Liebert DS Local Node Settings for Multiple Cards Factory default MAC addressesMonitoring Liebert Equipment Monitor and Control Functions WEB onlyWeb Interface Only Controlling Liebert Equipment Control tab Control Operations Click to view in right panelLiebert GXT2U example Output DS example Setpoints Links Event LogEvent Log Controls Scroll through Event Log tabView Web Card Information Support InformationSupport tab Listing in right panel Summary Events and Parameters Support tab Listing in right panel Events or ParametersTable A1 Overview of the upgrade process Appendix a Firmware Updates IntroductionEstimated Time to Download the Firmware Upgrade File OverviewTable A3 Communication settings Open the Terminal Emulation Interface Serial ConnectionOpen the Terminal Emulation Interface TCP/IP Connection Open the Telnet Interface Open the Web InterfaceDownload the Firmware Upgrade File to the Computer Choose a Method to Install the Firmware Upgrade Install the Firmware UpgradeUpdating the Firmware Http WEB Method Open a Connection to the Card Specify Tftp Server and Upgrade FilenameTable A4 Firmware update settings Tftp Reconnect to the CardBegin the Upgrade Process Tftp Method Web InterfaceTable A5 Firmware update settings Web Updating the Firmware Xmodem Serial Method Open a Terminal Emulation Connection 115200 bps Call menu Configure buttonConnect a Cable to the Serial Ports Change the Baud Rate toDownload the First Firmware Update File Download the Second and Third Firmware Update FilesComplete the Upgrade and Restore Communication Rate Call menu 9600 bps Configure buttonUpdating the Firmware Xmodem Serial Method A13 Updating the Firmware Xmodem Serial Method A14 Page Ti n Ne tIti That