Updating the Firmware - TFTP (HyperTerminal, Telnet, Web) Method
Begin the Upgrade Process
11.When ready to begin the update, choose Initiate TFTP Firmware Update.
12.Open the TFTP application and start TFTP. Ensure that all settings are ready to transfer the file, including the location of the upgrade file. Refer to your TFTP user manual for more details.
13.Return to the terminal emulation/Telnet screen. At the confirmation message prompt, enter y (yes) to confirm your choice. (To cancel, enter n for no.)
14.A message appears, as shown at right, showing the progress by percent complete.
15.When the progress screen shows 100% complete, the card will be rebooted. Press Enter when this is finished.
16.Press the Escape key to return to the Main Menu, then choose Exit and Save.
The upgrade is now complete.
Check the new firmware version if you wish (see A.3.2 - Determine the Liebert
IntelliSlot Card Type and Firmware Version).
TFTP Update Menu | |
1: IP Address 192.168.0.125 | |
2: Port | 69 |
3:Filename OCWEBCARD_HID3_2.300.0_035780_AppFwUpdt.bin
4:Initiate TFTP Firmware Update
<ESC>: Cancel menu level
Please select a key ?>
All Code In Flash Will Be Rewritten, Confirm? [y/n]
TFTP Update initiated
The firmware on this card is currently being updated. This operation may take 6 or more minutes depending
on network traffic and other factors. The card will be rebooted upon successful completion of the process OR control will be returned to this terminal session upon failure so another firmware update attempt can be made.
Firmware update in process... Percent Complete(0%)
Main Menu
1:System Information
2:IP Network Settings
3:Messaging
4:Factory Settings
5:Firmware Updates
q:Quit and abort changes
x:Exit and save
Please select a key ?>
A.5.2 
TFTP Method - Web Interface
To update the Liebert IntelliSlot card firmware using the TFTP method with a Web interface:
Open a Connection to the Card
1.Open a connection to the Liebert IntelliSlot card (if needed, see instructions in A.2.4 - Open the Web Interface).
2.Click on the Configure tab, then TFTP in the left panel.
Configure tab
Edit
TFTP
3.Enter the Administrator username and password (both are
a.Login
b.Password (default is Liebert)
A7