Emerson IS-WEB485ADPT installation manual Table A5 Firmware update settings Web

Page 52

Updating the Firmware - TFTP (HyperTerminal, Telnet, Web) Method

Specify TFTP Server and Upgrade Filename

4.Click the Edit button in the right panel.

5.Select options as needed and refer to the following guide to change any settings.

Table A5 Firmware update settings - Web

Parameter

Description

 

 

Server

The IP address of the TFTP server—for example, 192.168.0.125.

 

 

Port

Port that the TFTP server is using, typically 69.

 

 

 

Name of the firmware update file—128 characters maximum, including spaces and punctuation.

Filename

This is the file with the extension “.bin” downloaded in A.3.3 - Download the Firmware Upgrade

 

File to the Computer.

6. After making changes, click Save, then click Reinitialize in the left panel to reboot the card.

Configure tab

Save

TFTP

Reinitialize

Reconnect to the Card

7.Click the Configure tab, then TFTP and enter the username and password (Steps 2 and 3) to return to the TFTP screen as shown above.

Begin the Upgrade Process

8.Open the TFTP application and start TFTP. Ensure that all settings are ready to transfer the file, including the location of the upgrade file. Refer to your TFTP user manual for more details.

9.Return to the Web interface.

10.When ready to begin the download, click the Update Firmware button.

Update

Firmware

A8

Image 52
Contents Liebert IntelliSlot Web Cards Page Table of Contents Tables Support InformationImportant Safety Instructions Introduction Compatibility With Liebert EquipmentLiebert IntelliSlot card communication protocols Password Protection Web SupportSnmp Support Liebert Nform SupportInstall a Liebert IntelliSlot Web Card-Non-Adapter Version InstallationPrepare the Card for Configuration Communication settingsInstall a Liebert IntelliSlot Web/485 Card With Adapter Select Enabled ApplicationGuide to Configuration Configuration OverviewConfiguration interfaces Guide to configuration detailsOpen the Terminal Emulation Interface Serial Connection Connection settingsName Open the Terminal Emulation Interface TCP/IP Connection WinsockOpen the Telnet Interface TelnetOpen the Web Interface Saving Changes and Reinitializing the Web CardTerminal Emulation Serial or TCP/IP Connection / Telnet Web InterfaceSystem Information System information identifiersNetwork Settings Network Settings menu guideBoot/IP Settings Boot/IP settings rangeDomain Name Server DNS Settings Domain Name Server settingsManagement Protocol Management protocol rangesWeb Interface Display/Modify Communities Snmp Communications MenuSnmp communications menu Display/Modify Trap Communities 10.0.0.7 read public2Web server settings Specify Web Server SettingsWeb Server Click on View Certificate Certificate Path tab ViewInstall Certificate Automatically selectCertificate Error View Certificates Install Security Certificates Internet Explorer 7 or laterContinue to this website Certificate Import Wizard opens. Click Next Telnet Server Configure tab Edit TelnetTime Sntp Menu Time Server parameters Sntp Time Sync RateFactory default passwords Change Username / PasswordUsername and password guidelines Reset Authentication to Factory Defaults Messaging Configure tab Edit MessagingMessaging menu guide Mail Configuration Mail configuration guideSMS Configuration Configure tab EditSMS configuration guide Terminal Emulation Serial or TCP/IP Connec- tion / Telnet Customize MessagesMail and SMS message guidelines Configure tab Edit Customize Message Message Consolidation Time LimitFactory Settings Reset to Factory DefaultsConfigure tab Factory Defaults Reset To Factory Defaults Liebert DS Local Node Settings for Multiple Cards Factory default MAC addressesMonitor and Control Functions WEB only Monitoring Liebert EquipmentWeb Interface Only Control tab Control Operations Click to view in right panel Controlling Liebert EquipmentLiebert GXT2U example Output DS example Setpoints Event Log Event Log ControlsLinks Scroll through Event Log tabSupport Information View Web Card InformationSupport tab Listing in right panel Summary Events and Parameters Support tab Listing in right panel Events or ParametersAppendix a Firmware Updates Introduction Estimated Time to Download the Firmware Upgrade FileTable A1 Overview of the upgrade process OverviewOpen the Terminal Emulation Interface Serial Connection Table A3 Communication settingsOpen the Terminal Emulation Interface TCP/IP Connection Open the Telnet Interface Open the Web InterfaceDownload the Firmware Upgrade File to the Computer Install the Firmware Upgrade Choose a Method to Install the Firmware UpgradeUpdating the Firmware Http WEB Method Specify Tftp Server and Upgrade Filename Table A4 Firmware update settings TftpOpen a Connection to the Card Reconnect to the CardBegin the Upgrade Process Tftp Method Web InterfaceTable A5 Firmware update settings Web Updating the Firmware Xmodem Serial Method 115200 bps Call menu Configure button Connect a Cable to the Serial PortsOpen a Terminal Emulation Connection Change the Baud Rate toDownload the First Firmware Update File Download the Second and Third Firmware Update FilesComplete the Upgrade and Restore Communication Rate Call menu 9600 bps Configure buttonUpdating the Firmware Xmodem Serial Method A13 Updating the Firmware Xmodem Serial Method A14 Page Ne t ItiTi n That