Xerox 701P25032 manual Snmp configuration variables

Gateway and Network Configuration

Although the default is set so that the SNMP locality and unit of measure is the same as that of the LUI, the new feature allows the administrator to select a different locality or unit of measure for the SNMP gateway.

Remote SNMP clients can control the localization of text objects of syntax

LocalizedDescriptionStringTC by setting the MIB object: prtGeneralCurrentLocalization

Access is changed from Read-only to Read/Write.

However, Remote SNMP clients cannot control the units of measure localization of numeric MIB objects. The localization of these objects can only be controlled from the LUI.

SNMP configuration variables

Of the many parameters that are available for SNMP configuration, only the ones of common interest to Xerox customers are shown in the following table:

Table 1-2Configuration Variables

Parameter Name	Description	Value	Default
		Range	Value
CommandLine	Turn on/off the following flags:
	–l:logging to SNMP_DEBUG_LOG
	–w:logging to window
Printer operator	The name of the printer operator	String	<empty>
		(0...127)
Printer administrator	The name of the printer administrator	String	<empty>
		(0...127)
Printer administrator	The location of the office of the printer	String	<empty>
location	administrator	(0...127)
Printer administrator	The telephone number for contacting the	String	<empty>
Phone	printer administrator	(0...127)
Printer location	The location of the printer	String	<empty>
		(0...127)

System Guide 1- 11