Xerox 701P25032 manual Local User Interface LUI mapping to MIB, AppleTalk gateway configuration

Gateway and Network Configuration

Local User Interface (LUI) mapping to MIB

The following table shows the mapping between the LUI and MIB:

Table 1-3LUI Mapping to MIB

Local User Interface MIB

PrinterOperatorprtGeneralCurrentOperator

PrinterAdministrator prtGeneralServicePersonsysContact

PrinterAdmin,prtGeneralServicePersonsysContact

PrinterAdminURL

PrinterAdminPhoneNumber

PrinterLocationsysLocation

Printer and job messages

SNMP can broadcast messages about the printer and the jobs on the system. Printer messages may announce that the printer is idle, printing, or out of paper. Job messages announce that jobs are pending, processing, or completed. Other job-related information may include the job owner’s name, the job quantity, the job identifier, etc.

The information that is displayed at an SNMP Manager may not always reflect the exact status of a job or printer on the Xerox FreeFlow Print Server Controller. Those Managers that do not support loading of Management Information Bases (MIBs) only displays the printer and job status that they support.

NOTE: “Forwarding” is not a job state that is broadcast by the controller; therefore, job forwarding information is not displayed by the SNMP job managers.

AppleTalk gateway configuration

In Gateways, using the AppleTalk tab the administrator can enable or disable the protocol. If the protocol is enabled, the administrator can also select a default queue set for Appletalk.

Queue server options

In Gateways using the Queue Server tab, the administrator has the option to enable or disable NetWare and to define a Preferred Server Name. This entry field allows the administrator an easy method to directly point to a replica or NDS server name.

1-1 2 System Guide