Canon PC 140 manual Cartridge Handling Precautions

Page 25

Close the top cover by pressing down firmly on the button.

Return the platen to the center position. Before resuming copy operation turn the power switch ON.

WARNING:

•Never throw a used cartridge into a fire; doing so can result in an explosion.

REQUEST:

•The sealing tape is approximately 20” long so be sure to pull all of the sealing tape out from the cartridge.

•Do not pull the sealing tape out from the cartridge at an angle. If the sealing tape breaks before being pulled out fully, the cartridge is no longer able to be used in the copier.

MEMO:

•While replacing the cartridge, all current copy settings will be canceled. Be sure to reprogram the settings before resuming copying.

•The sealing tape grip is affixed to the end of the cartridge. Before pulling out the tape, be sure to peel it from the end of the cartridge. Then, pull the tape out slowly from the cartridge.

•When replacement of the cartridge is finished be sure the cover is closed all the way. If not, the power may turn OFF when the copier is operated.

•When packing the cartridge, insert it in the bag so that the side with the written instructions is facing upwards. Then place the cartridge into its box.

Cartridge Handling Precautions

Drum’s protective shutter

•Always hold the cartridge as shown so that the side with the written instructions is facing upwards. Do not forcefully move or push the protective shutter of the drum in any way.

•Never attempt to disassemble the cartridge or open the protective cover of the drum.

•If the copier is brought from the cold outdoors into a warm room, or if the room is rapidly heated, condensation may form inside the copier. This can adversely effect the quality of your copy images (e.g., blacked-out copies). When the copier is exposed to such conditions, allow at least two hours for the copier to adjust to room temperature before attempting to use it.

Getting Started

1

Replacing and

Storing Cartridges

23

Image 25

Contents Operators Manual Preface Symbols Used in This Operator’s Manual Important Safety InstructionsPage Table of Contents Transparencies Power Cord Supplies & AccessoriesTelephone Assistance USA Canon Information Center in Canada1Gettinging StartedStarted Installation Safety ConsiderationsPower Supply Handling Maintenance and Inspection Consumables Handling Precautions Installation Precautions Carrying the Copier by the Carrying Handle Transporting the CopierOn p Carrying the Copier by the Sides Transporting Copier by Car Main Unit Parts and Their FunctionsTop Cover Control Panel Error indicationsChecking the Package Contents Installing the CopierInstallation Procedure About the Cartridge Storingoring CartridgesrtridgesTest your cartridge before replacing it When to Replace the CartridgeApproximate copy yield Replacing CartridgesSlide the platen to the left until the mark is exposed Getting Started Cartridge Handling Precautions Recycling used cartridges Cartridge Storing PrecautionsCanon Cartridge Recycling Program Clean Earth CampaignMaximum weight = 70 pounds Maximum Option B Volume Box ReturnOption a Single Box Return Option C Multiple Box ReturnOption a UPS Pick-up Residents of Alaska and HawaiiOption B UPS Drop off OK-CANONCanada Program Option B Volume Box Return 8 or more cartridgesNormal Copying Operating ing Procedure ProcedureVarious Ways to Copy Normal Copying Turn the copier’s power switch onPress the key Making 10 or more Continuous Copies The F Mode Adjustment using exposure recalibration switch Adjusting the Copy ExposurePositioning Originals Press the key to switch to manual exposure control mode Adjusting the copy exposure manuallyAbout Copy Stock Setting copy paperSuitable copy stock Unsuitable copy stockPostcards Transparencies* Other Stock Various Ways to CopyIf transparencies do not feed smoothly Making Two-sided CopiesPosition the first original onto the platen glass Make a copy of the second original Copying Thick Books or Large OriginalsMaking Two-color Copies Key ABCMemo When Error Indicators Appear TroubleshootingbleshootingWhen Flashes When Error Indicators AppearWhen Letters or Numbers Light Up / Flash Clearing Paper Jams When Flashes Removing jammed paper Align the platen with the mark by sliding it to the left Cleaning the Paper Roller When the Error Indicator flashesTroubleshooting Copier will not operate What to Do If You Suspect There is a MalfunctionDuring copying No copy image appears on copiesWhite streaks appear on copies Paper jams occur frequentlyBlack streaks appear on copies Copies are completely blackCleaning the fiber lens top side Copy Image ProblemsIf Light Bands/ White Streaks Appear on Copies If Dark Bands/ Black Streaks Appear on CopiesCleaning the fiber lens reverse side Troubleshooting Ppendix dix Cleaning the Copier Routine Cleaning SpecificationsCleaning the Copier Clean the external housing of the copier in the same way Routine CleaningSpecifications Index Auto Indicator17, 43