Canon PC 140 manual Making 10 or more Continuous Copies The F Mode

Page 33

REQUEST:

•If the copier will not be used for a long period of time, unplug the copier from its power source.

NOTICE:

•If the copier has not been used for a long period of time, before operation move the platen by hand to the right, left and back to the center.

•Paper jams are most often caused by wrinkled or curled copy paper usage or by turning the power switch OFF while the copier is copying.

MEMO:

•Always turn on the power switch slowly.

•If the copier is not operated for a period of longer than 5 minutes after copying finishes, the power turns OFF automatically. (This is the Auto Power-Off Feature.)

•Do not copy with the platen cover left open, doing so will result in excessive toner consumption.

•A stack of copy paper 5 mm high (1/5 in. or up to 50 sheets of 20lb-bound copy paper) can be inserted into the multi-stack tray at one time.

Fan and even out the edges of the copy paper before placing it into the multi-stack tray.

•Every time the key is pressed the number of copies to be made increases by one. This can be repeated up to nine copies.

(See “Making 10 or more Continuous Copies” on p. 31.)

•Press the key to clear the copy quantity to one.

•When you have finished copying, do not leave unused copy paper in the multi-stack tray.

Making 10 or more Continuous Copies (The F Mode)

After pressing the key nine times, appears in the number of copies indicator. This is called the F mode. When operating in the F mode you can copy continuously until the multi-stack tray is empty.

NOTICE:

•When the number of completed copies in the copy tray reaches 10, remove them. Also, do not attempt to load copy paper into the paper feed tray while copying is in progress. Doing so will cause a paper jam.

Operating Procedure

2

Normal Copying

31

Image 33

Contents Operators Manual Preface Symbols Used in This Operator’s Manual Important Safety InstructionsPage Table of Contents Transparencies Power Cord Supplies & AccessoriesTelephone Assistance USA Canon Information Center in Canada1Gettinging StartedStarted Safety Considerations InstallationPower Supply Handling Maintenance and Inspection Consumables Handling Precautions Installation Precautions Transporting the Copier Carrying the Copier by the Carrying HandleOn p Carrying the Copier by the Sides Transporting Copier by Car Main Unit Parts and Their FunctionsTop Cover Control Panel Error indicationsInstalling the Copier Checking the Package ContentsInstallation Procedure About the Cartridge Storingoring CartridgesrtridgesTest your cartridge before replacing it When to Replace the CartridgeReplacing Cartridges Approximate copy yieldSlide the platen to the left until the mark is exposed Getting Started Cartridge Handling Precautions Recycling used cartridges Cartridge Storing PrecautionsCanon Cartridge Recycling Program Clean Earth CampaignMaximum weight = 70 pounds Maximum Option B Volume Box ReturnOption a Single Box Return Option C Multiple Box ReturnOption a UPS Pick-up Residents of Alaska and HawaiiOption B UPS Drop off OK-CANONCanada Program Option B Volume Box Return 8 or more cartridgesOperating ing Procedure Procedure Normal CopyingVarious Ways to Copy Turn the copier’s power switch on Normal CopyingPress the key Making 10 or more Continuous Copies The F Mode Adjusting the Copy Exposure Adjustment using exposure recalibration switchPositioning Originals Press the key to switch to manual exposure control mode Adjusting the copy exposure manuallyAbout Copy Stock Setting copy paperSuitable copy stock Unsuitable copy stockPostcards Transparencies* Other Stock Various Ways to CopyMaking Two-sided Copies If transparencies do not feed smoothlyPosition the first original onto the platen glass Make a copy of the second original Copying Thick Books or Large OriginalsMaking Two-color Copies Key ABCMemo When Error Indicators Appear TroubleshootingbleshootingWhen Flashes When Error Indicators AppearWhen Letters or Numbers Light Up / Flash Clearing Paper Jams When Flashes Removing jammed paper Align the platen with the mark by sliding it to the left Cleaning the Paper Roller When the Error Indicator flashesTroubleshooting Copier will not operate What to Do If You Suspect There is a MalfunctionDuring copying No copy image appears on copiesWhite streaks appear on copies Paper jams occur frequentlyBlack streaks appear on copies Copies are completely blackCleaning the fiber lens top side Copy Image ProblemsIf Light Bands/ White Streaks Appear on Copies If Dark Bands/ Black Streaks Appear on CopiesCleaning the fiber lens reverse side Troubleshooting Ppendix dix Cleaning the Copier Routine Cleaning SpecificationsCleaning the Copier Clean the external housing of the copier in the same way Routine CleaningSpecifications Index Auto Indicator17, 43