Canon PC 140 manual Installing the Copier, Checking the Package Contents, Installation Procedure

Page 20

Getting Started

1

Installing the

Copier

18

Installing the Copier

Checking the Package Contents

Remove the copier and the accessories from the shipping box. Use the following checklist to make sure you have received all the necessary accessories included with your copier.

Item	Quantity

Registration Card	1

Power Cord	1

Operator’s Manual	1

Cartridge	1

Muliti-stack tray	1

Copy tray	1

Installation Procedure

Before installing the copier be sure to check the safety of the power source. Then proceed with the following procedure.

Although the starter cartridge comes already installed in the main unit, it is necessary to remove the sealing tape from the cartridge before use.

The cartridge cannot be used if the seal is not removed.

(See “Installation Precautions”, on p. 11 and “Replacing and Storing Cartridges”, on p. 19.)

Remove the copier from its shipping bag and gently remove all the packing tape attached to the copier.

Slightly slide the copy tray and the multi- stack tray out from the opening between the disc and the platen cover, and then open the trays fully.

Slide the platen to the left, press the top cover release button and lift open the top cover. Grip the end of the cartridge, and pull it out of the copier.

(See “Replacing and Storing Cartridges”, on p. 19.)

Hold the cartridge level so that the side with the written instructions is facing upward.

Image 20

Contents Operators Manual Preface Important Safety Instructions Symbols Used in This Operator’s ManualPage Table of Contents Supplies & Accessories Transparencies Power CordTelephone Assistance USA Canon Information Center in Canada1Gettinging StartedStarted Power Supply Safety ConsiderationsInstallation Handling Maintenance and Inspection Consumables Handling Precautions Installation Precautions On p Transporting the CopierCarrying the Copier by the Carrying Handle Carrying the Copier by the Sides Transporting Copier by Car Parts and Their Functions Main UnitTop Cover Error indications Control PanelInstallation Procedure Installing the CopierChecking the Package Contents Storingoring Cartridgesrtridges About the CartridgeWhen to Replace the Cartridge Test your cartridge before replacing itSlide the platen to the left until the mark is exposed Replacing CartridgesApproximate copy yield Getting Started Cartridge Handling Precautions Cartridge Storing Precautions Recycling used cartridgesClean Earth Campaign Canon Cartridge Recycling ProgramOption B Volume Box Return Maximum weight = 70 pounds MaximumOption a Single Box Return Option C Multiple Box ReturnResidents of Alaska and Hawaii Option a UPS Pick-upOption B UPS Drop off OK-CANONOption B Volume Box Return 8 or more cartridges Canada ProgramVarious Ways to Copy Operating ing Procedure ProcedureNormal Copying Press the key Turn the copier’s power switch onNormal Copying Making 10 or more Continuous Copies The F Mode Positioning Originals Adjusting the Copy ExposureAdjustment using exposure recalibration switch Adjusting the copy exposure manually Press the key to switch to manual exposure control modeSetting copy paper About Copy StockSuitable copy stock Unsuitable copy stockVarious Ways to Copy Postcards Transparencies* Other StockPosition the first original onto the platen glass Making Two-sided CopiesIf transparencies do not feed smoothly Copying Thick Books or Large Originals Make a copy of the second originalMaking Two-color Copies ABC KeyMemo Troubleshootingbleshooting When Error Indicators AppearWhen Error Indicators Appear When FlashesWhen Letters or Numbers Light Up / Flash Clearing Paper Jams When Flashes Removing jammed paper Cleaning the Paper Roller When the Error Indicator flashes Align the platen with the mark by sliding it to the leftTroubleshooting What to Do If You Suspect There is a Malfunction Copier will not operateDuring copying No copy image appears on copiesPaper jams occur frequently White streaks appear on copiesBlack streaks appear on copies Copies are completely blackCopy Image Problems Cleaning the fiber lens top sideIf Light Bands/ White Streaks Appear on Copies If Dark Bands/ Black Streaks Appear on CopiesCleaning the fiber lens reverse side Troubleshooting Cleaning the Copier Routine Cleaning Specifications Ppendix dixCleaning the Copier Routine Cleaning Clean the external housing of the copier in the same waySpecifications Auto Indicator Index17, 43