Canon PC 140 manual Making Two-sided Copies, If transparencies do not feed smoothly

Page 38

Operating Procedure

2

Various Ways to Copy

36

If transparencies do not feed smoothly

Sometimes transparencies may not feed

easily into the copier after the key is pressed. When this happens, follow the procedure below.

Place a sheet of standard copy paper underneath the transparency. Position this paper so that it extends approximately 3/8” beyond the leading edge of the transparency.

3/8"

Hold the rear end of the two sheets as shown and insert them into the multi- stack tray.

While holding the rear edge of the sheets

press the key.

When the transparency begins to feed into the copier, let go of the sheets. After the transparency paper has disappeared into the copier, remove the copy paper by pulling it gently out from the paper feed slot.

Making Two-sided Copies

This copier can copy on both sides of copy stock.

Position the first original onto the platen glass.

ABC

Make a copy of the first original. (See “Normal Copying” on p. 30.)

Image 38

Contents Operators Manual Preface Important Safety Instructions Symbols Used in This Operator’s ManualPage Table of Contents Telephone Assistance USA Supplies & AccessoriesTransparencies Power Cord Canon Information Center in Canada1Gettinging StartedStarted Power Supply Safety ConsiderationsInstallation Handling Maintenance and Inspection Consumables Handling Precautions Installation Precautions On p Transporting the CopierCarrying the Copier by the Carrying Handle Carrying the Copier by the Sides Transporting Copier by Car Parts and Their Functions Main UnitTop Cover Error indications Control PanelInstallation Procedure Installing the CopierChecking the Package Contents Storingoring Cartridgesrtridges About the CartridgeWhen to Replace the Cartridge Test your cartridge before replacing itSlide the platen to the left until the mark is exposed Replacing CartridgesApproximate copy yield Getting Started Cartridge Handling Precautions Cartridge Storing Precautions Recycling used cartridgesClean Earth Campaign Canon Cartridge Recycling ProgramOption a Single Box Return Option B Volume Box ReturnMaximum weight = 70 pounds Maximum Option C Multiple Box ReturnOption B UPS Drop off Residents of Alaska and HawaiiOption a UPS Pick-up OK-CANONOption B Volume Box Return 8 or more cartridges Canada ProgramVarious Ways to Copy Operating ing Procedure ProcedureNormal Copying Press the key Turn the copier’s power switch onNormal Copying Making 10 or more Continuous Copies The F Mode Positioning Originals Adjusting the Copy ExposureAdjustment using exposure recalibration switch Adjusting the copy exposure manually Press the key to switch to manual exposure control modeSuitable copy stock Setting copy paperAbout Copy Stock Unsuitable copy stockVarious Ways to Copy Postcards Transparencies* Other StockPosition the first original onto the platen glass Making Two-sided CopiesIf transparencies do not feed smoothly Copying Thick Books or Large Originals Make a copy of the second originalMaking Two-color Copies ABC KeyMemo Troubleshootingbleshooting When Error Indicators AppearWhen Error Indicators Appear When FlashesWhen Letters or Numbers Light Up / Flash Clearing Paper Jams When Flashes Removing jammed paper Cleaning the Paper Roller When the Error Indicator flashes Align the platen with the mark by sliding it to the leftTroubleshooting During copying What to Do If You Suspect There is a MalfunctionCopier will not operate No copy image appears on copiesBlack streaks appear on copies Paper jams occur frequentlyWhite streaks appear on copies Copies are completely blackIf Light Bands/ White Streaks Appear on Copies Copy Image ProblemsCleaning the fiber lens top side If Dark Bands/ Black Streaks Appear on CopiesCleaning the fiber lens reverse side Troubleshooting Cleaning the Copier Routine Cleaning Specifications Ppendix dixCleaning the Copier Routine Cleaning Clean the external housing of the copier in the same waySpecifications Auto Indicator Index17, 43