Main Menu (continued)
COMPONENT TESTS
The COMPONENT TESTS option of the SCANNER DIAGNOSTICS menu provides a
•MOTOR SPEED – Enables the Customer Service Engineer to adjust the Scanner motor speed and correct magnification errors in the process direction. The diagnostic password is required for this function.
•LEAD EDGE/TRAIL EDGE – Enables you to execute the lead edge/trail edge diagnostic.
•SENSORS – Enables you to display the current state of the Scanner optical paper sensors and the thick document sensor.
MOTOR COMMUNICATIONS – Enables a document motor communications loopback test to assist in diagnosing a scanner problem.
•DOCUMENT MOTOR – Enables you to stop and start the document handler motor.
•LAMP – Enables you to turn the lamp on and off and receive a feedback from the illumination sensor.
•CALIBRATION MOTOR – Enables you to test the calibration zone motor.
To access the COMPONENT TESTS menu:
1.Press the Menu key. The MAIN MENU screen is displayed.
2.Press the Next key until DIAGNOSTICS is highlighted.
3.Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed.
4.Press the Next key until SCANNER DIAGNOSTICS is highlighted.
5.Press the Enter key to highlight SCANNER DIAGNOSTICS. The SCANNER DIAGNOSTICS menu screen is displayed.
6.Press the Next key until COMPONENT TESTS is highlighted.
7.Press the Enter key to select COMPONENT TESTS. The COMPONENT TESTS menu screen is displayed. The black arrows indicate that the menu contains more options than are visible. The selected option is highlighted.
COMPONENT TESTS
MOTOR SPEED
LEAD EDGE/TRAIL EDGE
SENSORS
8.Press the Previous or Next key to scroll through the list of options.
9.When the desired option is highlighted, press the Enter key to select the option. The screen for the selected option is displayed.
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide | 103 |