XES Synergix 8825/8830/8850/8855 Digital Solution User Guide | 58 |
Special features keys (continued)
Sample key
The Sample key allows you to print a small sample of a scanned image. You can then check the sample for quality or observe the results of features or copy quality adjustments. The dimensions of the sample are the width of the page by 210 mm. The sample is taken from a point equidistant from the lead and trail edge of the image.
To print a sample of a scanned image:
1.Press the Sample key. The Sample indicator lamp illuminates. The Scanner Control Panel is placed in Printer Interrupt mode and the Printer Interrupt indicator lamp illuminates. The Printer immediately prints a sample of the next image inserted into the Scanner. The SAMPLE MODE screen is displayed.
SAMPLE MODE
PRESS START TO ACCEPT PAGE.
PRESS C/CA TO REJECT.
2.Do one of the following:
Press the START key to print the complete image as a
3.Press the Sample key again to disable the Sample feature. The Printer is returned to the default priority setting and the Sample and Printer Interrupt indicator lamps are extinguished.