XES Synergix 8825/8830/8850/8855 Digital Solution User Guide | 12 |
Getting to know the Synergix Digital Solution (continued)
REDUCTION/ENLARGEMENT
The Reduction/Enlargement area of the Scanner Control Panel allows you to select one of three reduction/enlargement modes – Auto, Manual, and Preset. The illustration below depicts the Reduction & Enlargement portion of the Control Panel.
NOTE: Reduction/Enlargement can only be selected in COPY mode.
Reduction/
Enlargement
Auto
Manual
Preset
Auto
Auto automatically adjusts the reduction/enlargement to fit the size of media selected. To select the Auto mode, press the key beneath Reduction/Enlargement until the Auto indicator lamp illuminates.
NOTE: The size of the output media must be known in advance for this feature to operate. Therefore, Auto is not a valid selection if both the Synchro cut option and the Sheet or Auto media source option are selected. If you select this combination, an INVALID AUTO COMBINATION status is displayed.
Manual
Manual allows you to reduce the image captured by the Scanner to as little as 25% or as much as 400% of the original size before the copy is printed.
To select the Manual mode:
1.Press the key beneath Reduction/Enlargement until the Manual indicator lamp illuminates. The MANUAL REDUCTION/ENLARGEMENT screen is displayed.
NOTE: If the indicator lamp is already lit, press the key once to display the screen.
MANUAL REDUCTION/ENLARGEMENT
ENTER (25.0 – 400.0): 100.0%
2.Enter a reduction/enlargement between 25 and 400. You can select any value between these limits in 0.1% increments.
3.Press the Enter key to confirm your choice and return to the READY screen. The READY screen now displays the new reduction/enlargement percentage.
NOTE: Pressing the Exit key rejects the choice and retains the previous setting.