Xerox 604P18037 manual Maintenance, Cleaning Your Product, Disconnect Device

Page 11

1 Before Using the Machine

Maintenance

Any operator product maintenance procedures will be described in the customer documentation supplied with the product. Do not carry out any maintenance procedures on this product which are not described in the customer documentation.

Cleaning Your Product

Before cleaning this product, unplug the product from the electrical outlet. Always use materials specified for this product. The use of other materials may result in poor performance and may create a hazardous situation. Do not use aerosol cleaners, they may be explosive and flammable under certain circumstances.

WARNING - Electrical Safety Information

ZOnly use the power cord supplied with the equipment.

ZPlug the power cord directly into a grounded electrical outlet easily accessible. Do not use an extension cord. If you do not know whether an outlet is grounded, consult a qualified electrician.

ZThis equipment is to be used on a branch circuit that has larger capacity than rated ampere and voltage of this machine. See data plate on the rear panel for the rated ampere and voltage of this equipment. If the machine needs to be moved to a different location, contact a Xerox Service Representative or your authorized local representative or service support organization.

ZImproper connection of the equipment-grounding conductor can result in an electric shock.

XDo not place this equipment where people might step on or trip over the power cord.

XDo not place objects on the power cord.

XDo not override or disable electrical or mechanical interlocks.

XDo not obstruct the ventilation openings.

XNever push objects of any kind into slots or openings on the equipment.

ZIf any of the following conditions occur, switch off the power to the machine immediately and disconnect the power cord from the electrical outlet. Call an authorized local service representative to correct the problem.

–The equipment emits unusual noises or odors.

–The power cord is damaged or frayed.

–A wall panel circuit breaker, fuse, or other safety device has been tripped.

–Liquid has spilled into the equipment.

–The equipment is exposed to water.

–Any part of the equipment is damaged.

Disconnect Device

The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.

10

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 604P18037 Quick Reference GuideQuick Reference Guide 604P18037 Increase Your ProductivityProducts Subject To Ordinary Export Regulations Table of Contents Copy Print Multiple-UpIndex 111 Cleaning the MachineXerox Welcome Center Before Using the MachineConventions Related Information Sources Languages Displayed on the Touch ScreenElectrical Supply Safety NotesOperator Accessible Areas Disconnect Device MaintenanceCleaning Your Product Do Not Do These Laser Safety InformationOperational Safety Information Do TheseFor Consumables Maintenance InformationOzone Safety Information CE Mark Product Safety CertificationRegulatory Information Radio Frequency EmissionsData Coupler Information For FAX FunctionFAX Send Header Requirements Canada Europe Regulatory Information for RfidEnvironmental ChoiceM Environmental ComplianceCanada Energy StarEurope About LicenseOriginal SSLeay Illegal Copies Illegal Copies Other Countries USA/Canada European Union Product Recycling and DisposalPage Machine Components Product OverviewTrays 3 FinisherDuplex Module Button Function System ControlsMail Services and FeaturesScan to Mailbox Setup MenuFax/Internet Fax Network ScanningPowering Off Power On/OffGround Fault Interrupter GFI Powering OnLow Power Mode Power Saver ModesSleep Mode Changing the Default Time SettingsChanging the Default Time Settings Modes All ServicesMachine Status FeaturesJob Interrupt Job StatusRecycled Paper Load the Documents Copying ProcedureCopy Document Glass Document FeederSelect the Features Confirm the Copy Job in the Job Status Enter the QuantityStart the Copy Job Stop the Copy Job Basic CopyingReduce/Enlarge Screen Reduce/EnlargeAuto Paper SupplyVariable % Independent X-Y %Paper Size Paper Supply ScreenTray 5 Bypass Screen Bypass2 H to H SidedPaper Type 1 SidedTop Left Copy OutputSided Screen Rotate SideStaple Position Copy Output ScreenStaples Left Top RightOutput Destination Image Quality CopyOriginal Type Sharpness Lighten/DarkenAuto Exposure Scan Options CopyBound Originals Start Page & End Sided Book CopyOriginal Size Custom Mixed Size OriginalsAuto Size Detect Variable Erase Border EraseMargin Shift NormalMargin Shift Side 2 Screen Margin Shift Side 1 ScreenAlways On Image RotationIndependent Shift Mirror ShiftImage Rotation Rotation Direction Screen Mirror Image/Negative ImageHead to Left Output Format CopyOriginal Orientation Head to TopBooklet Creation Gutter Screen Booklet CreationPrinted Covers Paper Tray SettingsBooklet Creation Covers Screen Booklet Creation Originals ScreenFront Cover CoversSided No CoversNo Separators + N Sets Transparency SeparatorsBlank Separators Blank Separators + N SetsImage Order Multiple-UpPoster Repeat Image Number AnnotationStamp DateUser Account Number Set NumberingControl Number Serial Number Job AssemblyBuild Job Date and TimeStop Change SettingsSample Set Chapter DivisionCountry Code for Fax Option Fax/Internet FaxFax/Internet Fax Procedure Specify the Destination Confirm the Fax/Internet Fax Job in the Job Status Start the Fax/Internet Fax JobStop the Fax/Internet Fax Job Page Scan/E-mail Scanning ProcedureScan/E-mail Save the Scanned Data Start the Scan JobConfirm the Scan Job in the Job Status Stop the Scan Job Print Sided Print Print Driver FeaturesJob Type Poster Print ModeDraft Mode Multiple UpPage Loading the Paper Trays Paper and Other MediaLoading Paper Preparing Paper for LoadingPaper and Other Media Bypass Tray Tray Tandem Tray Module TTM Auto Tray SwitchingStandard Sizes Storing and Handling PaperSupported Paper Sizes and Types Supported Paper Sizes128.5 182.0 Supported Paper Sizes and Types Non-standard SizesSupported Paper Types Paper Type Weight g/m Tray 2 Duplex FinisherOrdering Supplies MaintenanceCleaning the Machine Document Feeder and Output Trays Replacing the Drum CartridgeDocument Glass and Constant Velocity Transport Glass Control Panel and Touch ScreenCountry Part Number Comments Replacing the Toner CartridgeLoading Staples Page Fault Clearance Procedure Problem SolvingPaper Jams Paper Jams Green Lever A2 Paper Jams in Cover aGreen Lever A1 Paper Jams in Cover B Paper Jams in Cover E Paper Jams in Cover CTray Paper Jams in Trays 1, 2, and 3, 4 OptionalPaper Jams in the Tandem Tray Module Optional Paper Jams in the Duplex Module Cover D Optional Paper Jams in Tray 5 BypassFinisher Transport Cover F Paper Jams in the Finisher OptionalFinisher Top Cover Document Jams Symptom Recommendation Troubleshooting TablesSymptom Recommendation Symptom Recommendation Refer to the Paper and Other Media Output Quality Fault CodesSerial number will be displayed Numerics IndexIndex Rfid Time settings
Top Page Image Contents