3.Add, delete, or modify drivers as needed. v To add a driver:
a.In the Options box, select Modify.
b.Select the driver and press Enter.
c.Press Insert to select from a list of drivers provided with NetWare.
d.Press Insert again to install a driver from diskette.
vTo delete a driver:
a.In the Options box, select Modify.
b.Select the driver and press Enter.
c.Select the driver to delete and press Delete.
vTo modify a driver:
a.In the Options box, select Modify.
b.Select the driver and press Enter.
c.Select the driver to modify and press Enter.
d.Select the property to modify.
Server driver installation in existing NetWare 5.0 Server
The following procedure explains how to use NWCONFIG to load a LAN driver and bind a protocol.
1.Create a diskette containing the extracted files from the NETWAREP.EXE package file on the adapter
2.At the server console prompt, enter NWCONFIG.
3.Select Driver Options → Configure network drivers.
4.To select the driver from all of the available drivers, select Select a driver. The screen will display a list of all available drivers.
5.Press Insert. Follow the instructions on the panels. Use the diskette that you created in step 1 when you are prompted to supply an unlisted driver. The directory is a:\novell\netware.