IBM 16/4 Token-Ring manual Valid values PortNumber, PriorityValue

Table 9. DOS and OS/2 NDIS device driver parameters in PROTOCOL.INI (continued)

Parameter	Explanation
TCPPortRangeN (OS/2	This represents a set of parameters which designates the transmit frame priority value for a
only)	specified TCP port range. N is 1, 2, 3, 4, or 5. The format of this 9-digit hexadecimal string
	is:
	PortNumber	PortNumber	PriorityValue
	where each PortNumber is a four-character hex value and PriorityValue is a one-character
	hex value. The two PortNumber fields define a starting and ending value that make up a
	range, with the starting value less than or equal to the ending value.
	Valid values:
	PortNumber
	0x0000 to 0xFFFF
	PriorityValue
	1 to 6
	There is no default for this parameter.
UDPPortRangeN (OS/2	This represents a set of parameters which designates the transmit frame priority value for a
only)	specified UDP port range. N is 1, 2, 3, 4, or 5. The format of this 9-digit hexadecimal string
	is:
	PortNumber	PortNumber	PriorityValue

where each PortNumber is a four-character hex value and PriorityValue is a one-character hex value. The two PortNumber fields define a starting and ending value that make up a range, with the starting value less than or equal to the ending value.

Valid values:

PortNumber

0x0000 to 0xFFFF

PriorityValue

1 to 6

There is no default value for this parameter.

Appendix B. NDIS 2 device driver parameters 57