IBM 16/4 Token-Ring manual This wizard searches for updated drivers for Adapter name

1.On the desktop, click My Network Places with the right mouse button and select Properties.

A Network and Dial-up Connections window will appear containing one or more Local Area Connection icons.

2.Place the cursor over each icon until you see a description box containing IBM PCI Token-Ring Adapter.

3.Click the appropriate Local Area Connection icon with the right mouse button and select Properties.

4.Select the Configure button in the Local Area Connection Properties window.

5.Select the Driver tab in the IBM PCI Token-Ring Adapter Properties window and select the Update Driver. . . button.

The Update Device Driver Wizard dialog box opens. The dialog box contains the following text:

This wizard searches for updated drivers for: (Adapter name)

6.Select Next to continue.

7.On the next page, select Search for the best driver for your device and then select Next.

8.The next page of the wizard will ask where you would like to look for the device driver.

v If you are installing the device driver from the product CD-ROM, insert the CD-ROM into the CD-ROM drive and make sure that the CD-ROM drive checkbox is checked.

vIf you are installing from a diskette that you built from the CD-ROM or from the Web, insert the diskette and make sure that the Floppy disk drives checkbox is checked.

9.Select Next to continue. Windows should find an updated device driver on the diskette or the CD-ROM. Make sure that The updated driver is selected on the page and select Next.

Note: If the wizard does not specify the correct driver location, for example the CD-ROM or diskette drive, perform the following steps:

a.Click the Back button twice.

b.Select Display a list of known drivers . . . and then select Next.

c.Select Have Disk. . . and then specify the location of the driver (the CD-ROM or diskette drive letter).

d.After you select the correct driver, an Update Driver Warning window might appear. If so, click Yes to continue.

10.The next page of the wizard should confirm that the hardware and device driver are found. Select Next again to begin copying files.

Notes:

a.Windows might prompt you for the driver diskette. If so, type the letter of your drive.

b.Windows might also prompt you for the Windows 2000 CD-ROM in order to install its default network protocols. Make sure that the location of your Windows 2000 installation files (for example, d:\ or d:\win2000 or c:\windows\catroot) appears in the entry and select OK.

c.A Digital Signature Not Found window might appear saying that the driver is not digitally signed. If so, select Yes to continue.

11.After the files are copied, the wizard displays the following message:

Chapter 3. Software installation 31