FARGO electronic HDP600-LC, HDP600 CR100 manual Downloading Firmware Updates

RESTRICTED USE ONLY Fargo Electronics, Inc.

Downloading Firmware Updates

Step

Procedure

1

2

3

4

5

Refer to the following steps to download Firmware updates:

Select the Download Firmware button. If you have Internet access, this will automatically take you to the Firmware Updates section of the Fargo website. If it does not, Guidely open your browser and go to the Firmware Updates section in the Fargo Electronics Technical Support Web site:

http://www.fargo.com/tech_support/

Select your specific Printer model and click on the Submit button. Click on the Firmware file link labeled for the specific Printer model.

Click on OK when prompted to Save this Program to Disk and then select a folder in which to save the Update file.

a.Once the file has been downloaded, navigate to the location where the file was saved. (Note: The Firmware Update file has been compressed for ease of downloading.)

b.Decompress the file by double-clicking on the designated icon.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 12-3