FARGO electronic HDP600 CR100, HDP600-LC manual Fargo Electronics, Inc

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)

∙

If the Printer is equipped with the Card Lamination Module and the Lamination Station is opened, an LCD message will appear; and the Lamination Module's LED will flash. (Note: To move the Lamination Module's Rollers, push the Module's Cancel or Resume buttons.)

∙

Once the Printer has finished its system check and with the Printer closed, the Printer will display READY to indicate that the Printer is ready for operation. (Note: The Printer will stay in this mode until it receives a print job or it is turned OFF.)

∙ If the Printer is opened, the Printer Open screen will appear. Press either the FWD or BWD buttons to move the Printer's card path Rollers in the indicated direction.

Ready / Printer Open Screens

Description

Component

Printer Components: LCD and Softkey Control Pad (continued)

If both the Printer and Lamination Station are open, the LCD's FWD or BWD softkey buttons will move ALL Rollers. In any of these screens, the Printer will always display the MENU option above the center softkey button. Press this button to access the Printer's menu options. (Note: The MENU option is available only in the READY / PRINTER OPEN screens.)

Use the scroll buttons to select between moving the FWD or BWD Card Rollers or the FWD or BWD Card Rollers. This is helpful when cleaning the Printer or if clearing jammed media.

In any of these screens, the Printer will always display the Menu option above the center softkey button.

Press this button to access the Printer's menu options. (Note: The Menu option is available only in the Ready / Printer Open screens.)

RESTRICTED USE ONLY

Fargo Electronics, Inc.

2-18