FARGO electronic HDP600 CR100, HDP600-LC manual Print Ribbon Options Print Speed- Batch Mode

Print speeds do not include encoding time or the time needed for the PC to process the image.

Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print.

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technical Specifications (continued)

Term

Print Ribbon Options

Print Speed- Batch Mode

Description

HDP600 and HDP600-LC:

∙Full color, YMC, 700 prints

∙Full color with resin black, YMCK, 250 or 500 prints

∙Full color with two resin black Panels, YMCKK, 400 prints

HDP600 CR100 and HDP600-LC CR100:

∙Full color with two resin black Panels, YMCKK, 400 prints

∙Full color with resin black and YMCKK, 400 prints; extra wide for over-the-edge printing on CR-100 cards

™system forAll HDP Ribbons utilize Fargo's exclusive RibbonTraq

maximum print quality, performance, reliability and ease of use.

Note No. 1 (CR100): The YMCKH and YMCKK Ribbons are only used on the HDP600 CR100 and HDP600-LC CR100 Printers.

Note No. 2 (HDP600 print ribbons): Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing.

HDP600 and HDP600-LC (see note below):

∙35 seconds per card/112 cards per hour (YMC with transfer)

∙40 seconds per card/94 cards per hour (YMCK with transfer)

∙72 seconds per card/54 cards per hour (YMCKK with transfer)

∙40 seconds per card/90 cards per hour (YMCK/Lamination)

∙72 seconds per card/50 cards per hour (YMCKK/Lamination)

HDP600 CR100 and HDP600-LC CR100 (see note below):

∙85 seconds per card/45 cards per hour (YMCKK with Transfer)

∙93 seconds per card/45 cards per hour (YMCKK/Lamination)

Print speed indicates an approximate print speed and is measured from the time a card feeds into the Printer to the time it ejects from

the Printer.

∙

∙

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 2-12