RESTRICTED USE ONLY

Fargo Electronics, Inc.

Adjusting the Card Lamination Module

The HDP600 supports the attachment of an optional Card Lamination Module. This Module can be ordered pre-installed on the Printer from the factory or can be ordered separately as a field upgradeable Module. Once attached, the Card Lamination Module allows you to apply Fargo certified overlaminates for more secure, tamper-resistant cards. This section explains all aspects of the Card Lamination Module's operation and the overlaminate materials available.

IMPORTANT! Fargo Card Printers require highly specialized Print Ribbons to function properly. To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo Certified Supplies. For this reason, your Fargo warranty is void, where not prohibited by law, if you use non-Fargo Certified Supplies. To order additional materials, please contact your authorized reseller.

Adjusting the Card Flattener

The Card Lamination Module provides an adjustable Card Flattener that allows you to fine- tune the flatness of laminated cards. This flattener works by reverse bending cards as they eject from the Laminator while they are still warm.

In most cases, card warpage is only a concern when laminating on a single side of card stock which has a PVC-based core rather than a polyester-based core. Cards with a PVC- based core are not as heat resistant and are not recommended for use when laminating

By default, the Card Flattener is configured at the factory to accommodate UltraCard III type card stock. (Note: If you are experiencing an unacceptable amount of card warpage, please refer to the following to adjust the Card Flattener.)

Step

Procedure

1

2

3

4

Open the Card Lamination Module.

Remove the overlaminate material if installed.

If laminated cards are bowing upward, turn the Card Flattener Adjustment Lever clockwise. (Note: This pushes the flattener Roller down to increase the reverse bending pressure. For best results, turn the knob one full rotation, then print and laminate a test card. Repeat this process as necessary.)

If the card is bowing downward, the reverse bending pressure may be too great. In this case, rotate the adjustment knob counter-clockwise. (Note: Some card types have very low heat resistance and may not be acceptable for laminating.)

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)

6-6

Page 211
Image 211
FARGO electronic HDP600-LC, HDP600 CR100 manual Adjusting the Card Lamination Module, Adjusting the Card Flattener

HDP600, HDP600 CR100, HDP600-LC specifications

FARGO, a renowned name in the world of identification and card printing technologies, has created a powerful lineup of printers, including the HDP600-LC, HDP600 CR100, and the HDP600. These models are designed to cater to a variety of needs, from corporate identification to secure access control, making them essential tools for businesses and organizations.

The FARGO HDP600-LC is known for its high-definition printing capabilities. It utilizes a unique retransfer printing process that allows for better image quality and durability. This process involves transferring the image onto a clear film before embedding it onto the card surface, resulting in vibrant colors and sharp details. The HDP600-LC also supports a range of card sizes, including CR80 and CR100, and is versatile enough to handle different card types, such as PVC, PET, and composite cards. Additionally, this model has an easy-to-use interface that makes it accessible for operators of all skill levels, featuring a simple LCD screen for convenient monitoring.

The FARGO HDP600 CR100 is specifically designed for printing CR100-sized cards, catering to industries that utilize larger card formats. This printer shares the same high-definition retransfer technology as the HDP600-LC, ensuring consistent image quality. Moreover, the HDP600 CR100 is equipped with advanced security features, including encryption and password protection, making it ideal for applications that require secure credentialing.

The FARGO HDP600 model stands out for its flexibility and efficiency. It allows for dual-sided printing, making it efficient for operations needing to print on both sides of the card without compromise. The printer can handle high-volume printing tasks with ease, thanks to its rapid throughput. Furthermore, its modular design makes it easy to upgrade and expand, ensuring that the HDP600 can evolve with an organization’s needs.

In terms of connectivity, all three models offer USB and Ethernet options, allowing for easy integration into existing systems. They are designed for durability and reliability, with components built to withstand regular usage in a busy environment. With features such as automatic card thickness detection and a range of finishing modules for laminating and encoding, the FARGO HDP600 series represents the culmination of advanced technologies for modern card printing needs.

In conclusion, whether it's the HDP600-LC, HDP600 CR100, or HDP600, FARGO delivers robust identification solutions that meet diverse printing demands while prioritizing quality, security, and user-friendliness.