FARGO electronic HDP600-LC, HDP600 CR100 manual Step Procedure

RESTRICTED USE ONLY Fargo Electronics, Inc.

Verifying that your PC can access the Printer using the ping command

Step

1

Procedure

Follow these instructions to issue a ping command to the Printer:

At a DOS prompt, enter ping [IP Address]

Example: C:\>ping 210.1.10.240

∙If the ping response is successful, move on to the next troubleshooting procedure. See Display A below.

∙If the ping response is not successful, continue to step 2 of this procedure. See Display B below.

Display A - Example of sending a ping to the Printer with a successful response

Display B - Example of ping timeout to an invalid IP address

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 5-58