FARGO electronic HDP600 Adjusting the Card Size, Adjusting the Card Thickness Adjustment Lever

RESTRICTED USE ONLY Fargo Electronics, Inc.

IMPORTANT! Fargo Card Printers require highly specialized Print Ribbons to function properly. To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo Certified Supplies. For this reason, your Fargo warranty is void, where not prohibited by law, if you use non-Fargo Certified Supplies. To order additional materials, please contact your authorized reseller.

Adjusting the Card Size

The Printer is only configured to feed and print standard CR-80 sized cards. (Note: When loading cards which vary from the standard 30 mil thickness, it is necessary to make simple adjustments to the Printer.)

∙Wider Cards: HDP600 does not accommodate wider loads. Please consult with your Fargo sales representative if you have wider card needs.

∙Thicker or Thinner Cards: If loading thicker or thinner cards into the Printer, adjust the Card Thickness Adjustment Lever.

Adjusting the Card Thickness Adjustment Lever

When loading thicker or thinner cards, it is important that the Card Thickness Adjustment Lever be set accordingly to ensure the Printer feeds only one card at a time. (Note: If the Printer is equipped with the Card Lamination Module, only cards with a thickness ranging from 30 mil to 40 mil can be laminated. Thicker cards will, however, be allowed to pass through the Lamination Module if you choose to print-only.

Step

Procedure

1

2

Open the Printer's Card Access Door and locate the Card Thickness Adjustment Lever.

Press the blue lock and raise or lower the Lever to the setting that matches the thickness of the cards. (Note: If you do not find a setting for the exact card thickness, set the adjustment knob to the setting closest to the thickness of the cards.)

The adjustment level controls the position of the Printer's internal Card Separator, which is designed to accommodate a range of card thicknesses surrounding the given card thickness settings.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-4