FARGO electronic HDP600 CR100, HDP600-LC manual Board Level Diagnostics

RESTRICTED USE ONLY Fargo Electronics, Inc.

Section 10: Board Level Diagnostics

Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 card Printers.

The purpose of this section to provide the User with specific Board Level Diagnostic procedures for Board Errors and Sensor Testing for the HDP600.

Table of Contents

Section 10: Board Level Diagnostics _________________________________________ 10-1

Board Errors ______________________________________________________________________ 10-2

Resolving the EE Memory Error ____________________________________________________ 10-2

Resolving the EE Checksum Error ___________________________________________________ 10-2

Resolving the DRAM Memory Error _________________________________________________ 10-3

Resolving the RAM Memory Error __________________________________________________ 10-3

Resolving the FPGA Error _________________________________________________________ 10-4

Sensor Testing _____________________________________________________________________ 10-4

Reviewing the Sensor Locations and Voltages__________________________________________ 10-5

Reviewing the Sensor Locations and Voltages (continued)______________________________ 10-6

Reviewing the Motor Locations and Cables ____________________________________________ 10-7

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 10-1