FARGO electronic HDP600 CR100 manual Reviewing the Lamination Module Sequence of Operations

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing the Lamination Module Sequence of Operations (continued)

Step Process

6

7

8

9

10

11

12

13

14

15

16

17

The Card Feed Motor and the Lamination Ribbon Motor activate for the length of the card.

The Lamination Roller Lift Motor cycles until the Lamination Roller Lift Sensor detects state change.

The card is fed back to the Flipper Table.

The Flipper Table Clutch engages.

The Flipper Table Motor activates until the Card is inverted based on the Flipper offset setting.

The Flipper Table Clutch disengages.

The card is fed off the Flipper Table.

The Flipper Table Clutch engages.

The Flipper Table Motor activates until the Flipper Table is homed.

The Flipper Table Clutch disengages.

Repeat Steps 2 through 7.

The card is fed out of the Printer.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 1-9