FARGO electronic HDP600-LC, HDP600 CR100 manual Set sysinfo contact location label From

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing the Telnet Command Table (continued)

Telnet Command

set sysinfo contact location label

from

Command Purpose

Set the contact string.

Set the location string.

Set the label string.

Set all strings from default or current settings.

Command Format

set sysinfo label [<STRING>]

set sysinfo location [<STRING>]

set sysinfo label [<STRING>]

set sysinfo from defaultcurrent

syslog

name

type

Change the name of a system log path

Change the type of a system log path. This starts or stops logging on start of jobs or on faults.

set syslog <LOG_NAME> name <NEW_NAME>

set syslog <LOG_NAME> type [[-]job] [[-]pfault]

dest

email

Change the destination	set syslog <LOG_NAME> dest
of a system log path.	noneemailudptcp
This may be set to
none, e-mail, udp or
tcp.
Change the e-mail	set syslog <LOG_NAME> email
address for e-mail	<EMAIL>
notification for a
system log path. It
must specify a valid e-
mail address.

udp

from

Specify the IP address of the UPD system logging program.

Restore system log path settings from the default or current settings.

set syslog <LOG_NAME> udp

<IPADDRESS>

set syslog from defaultcurrent

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 5-10