FARGO electronic HDP600-LC, HDP600 CR100 Reviewing the Lamination Module Sequence of Operations

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing the Lamination Module Sequence of Operations

The LAM sequence of operations begins after printing has occurred with the Card Printer.

Step Process

1

2

3

4

5

The card is fed onto the Lamination Module Flipper Table.

The card is fed to the Card Position Sensor.

The Lamination Ribbon Motor begins cycling until the Lamination Sensor detects the mark.

The Card Feed Motor activates to center the card on the Platen Roller.

The Lamination Roller Lift Motor cycles until the Lamination Roller Lift Sensor detects state change.

Continued on the next page

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 1-8