FARGO electronic HDP600-LC, HDP600 CR100 manual Glossary of Terms

RESTRICTED USE ONLY Fargo Electronics, Inc.

Glossary of Terms (continued)

Term

Oversized Cards

Overlaminate

Parallel

Parallel Port

PC (Personal

Computer)

PCB (Printed Circuit Board)

Peel

Peel-Off

Peripheral

Definition

Oversized cards are used for more efficient visual identification and are available in many non-standard sizes. The most popular sizes are CR-90 (3.63 x 2.37/92mm x 60mm) and CR-100 (3.88 x 2.63/98.5mm x 67mm).

Protective clear or holographic material to increase security and durability applied over the printed surface with a hot Roller.

A method of data transfer in which serial data is divided into sections and sent simultaneously down parallel wires to speed transfer rate.

A communication socket on a device that allows for parallel data transfer.

A stand-alone, programmable, electronic device that can store, retrieve and process data consisting of a CPU, mouse, keyBoard and monitor.

A solid, multi-layered plate on which electronic elements are attached, either through the Board or on the surface.

The removal of a film or Ribbon from a card surface (at a perpendicular angle) to ensure proper transfer, then separation, from the card surface.

A bar on the Lamination section that holds the film at the correct position and provides proper peel angle.

Any device that is attached externally to a PC. These often share the same data cable or port as a Printer and can be the source of communication problems.

Continued on the next page

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 15-13