FARGO electronic manual Using the Card tab HDP600 CR100/HDP600-LC CR100

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Card tab (HDP600 CR100/HDP600-LC CR100)

Step

Procedure

1

Select the appropriate card size option from three (3) standard card sizes.

∙CR-100

OR

∙One (1) custom size is available.

(Note: The dimensions of the total print area for each card size will appear in the Print Width and Print Length boxes. These print area dimensions are .04" (1mm) larger than the actual card size. This is so the Printer can overprint images to ensure they will appear Edge-to-Edge when transferred to the card. For this reason, when designing a card format, always set the card size or page size within the card design program to the exact Print Length and Width dimensions listed in the Printer Driver.)

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-13