FARGO electronic HDP600-LC, HDP600 CR100 manual Glossary of Terms

RESTRICTED USE ONLY Fargo Electronics, Inc.

Glossary of Terms (continued)

Term

CR-79

CR-80

CR-90

CR-100

Cursor

Darkness

DB-9

DC Motor

DC (Direct Current)

Default

Defrag

DIP switches (Dual In-line Package Switches)

Definition

A card dimension standard of 2.0625 L X 3.3125 W (+/-0.002 W, +/-0.005 L) or 52.400 X 84.150 mm.

A card dimension standard of 2.125 X 3.370 (+/-0.002 W, +/- 0.005 L) or 53.975 X 85.598 mm.

A card dimension standard of 2.375 X 3.625 (+/-0.002 W, +/- 0.005 L) or 60.325 X 92.075 mm.

A card dimension standard of 2.625 X 3.875 (+/-0.002 W, +/- 0.005 L) or 66.675 X 98.425 mm.

The marker in the LCD display Window that indicates the active selection.

A reference to color saturation.

A 9 pin, D-shaped connector, typically used in serial port interfaces.

A Motor that works on DC with continuous motion.

Electronic flow that is unidirectional, flowing from the positive (+) to negative (-) of a power source.

A setting or parameter that comes preset from the factory in driver or Firmware. Performance parameters can be customized in the driver, but can be reset to the factory values usually through the push of the default button. The default values for the Firmware are usually denoted on a label attached to the Printer.

Abbreviation for defragmenting. The process of reformatting data on a hard drive so that it uses space more efficiently.

A small array of mechanical switches installed on the Board that can be configured to change Printer operations including providing a variety of self-tests.

Continued on the next page

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 15-4