FARGO electronic HDP600 CR100, HDP600-LC manual Loading the Overlaminate

RESTRICTED USE ONLY Fargo Electronics, Inc.

Loading the Overlaminate (continued)

Step

Procedure

6

Close the Lamination Arm by pressing down on the center of the Lamination arm until it snaps into place, as shown below.

Caution: Do not reverse the overlaminate roll. Damage may occur to the Lamination Roller!

Display C – Securing the Lamination Arm

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 3-19