FARGO electronic HDP600 CR100, HDP600-LC manual Cleaning the Platen and Transfer Rollers

RESTRICTED USE ONLY Fargo Electronics, Inc.

Cleaning the Platen and Transfer Rollers

Step

Procedure

1

2

3

4

5

6

7

Leave the Printer power ON and open the Lamination Arm.

If using a Printer with a Card Lamination Module attached, also open the Lamination Module's Top Cover and Lamination Station.

Remove the Print Ribbon and HDP Film.

Locate the Print Platen Roller.

Use a Cleaning Pad from the Printer Cleaning Kit to wipe the Roller clean.

Locate the Transfer Platen Roller.

Danger: Transfer Rollers will be extremely hot. Printer must be cold in order to clean it.

a.Use a Cleaning Pad from the Printer Cleaning Kit to wipe the Roller clean. Press the Forward and Back buttons to move the Roller back and forth while cleaning.

b.If using a Printer with a Card Lamination Module (attached), wipe the Lamination Transfer Roller clean as well.

Replace the printing supplies and close the Print and Transfer Stations after the Rollers are clean and completely dry.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 8-10