FARGO electronic HDP600 CR100, HDP600-LC manual Pause button LED Light

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printer Components: LCD and Softkey Control Pad (continued)

Component

The Pause button

The LED Light

Description

Use this button to pause the Printer at any time during operation. Note the Printer will always finish its current task before pausing.

When the Printer is paused, the LED Light will flash and the Pause softkey button will change to Resume.

Press Resume to continue Printer operation.

This light works in conjunction with the Printer's LCD Display to help communicate the Printer's current status. It is especially effective when you are too far away from the Printer to read the LCD Display. The following explains how to interpret both LED Lights on the exterior of the Printer.

∙Off: Indicates the Printer power is OFF.

∙Solid GREEN: Indicates the Printer is powered ON and ready for operation.

∙Flashing GREEN: Indicates a Printer ERROR or ATTENTION condition. Refer to the Printer's LCD Display for information.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 2-20