FARGO electronic HDP600-LC manual Reviewing HDP 600 Series Card Printer Sequence of Operations

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing HDP® 600 Series Card Printer - Sequence of Operations (continued)

Step Process

12

13

The Fan turns ON as required to keep head cool.

The Ribbon Drives, Film Drive and Print Platen Stepper turn ON and the Printhead burns the image data until the image data is depleted. All stop. (Note: The Ribbon Encoders and Film Encoders are active during this step.)

14

15

16

17

The Headlift Motor engages, moving the Printhead up until the Headlift Sensor is activated. All stop.

The Ribbon Drives and Film Ribbon Drive advance until the Print Ribbon Encoder sees acceleration at release. (Note: The Ribbon Encoders are active during this step.)

The Ribbon Drives move until the Print Ribbon Position Sensor finds the next panel. All Motors stop. (Note: The Ribbon Encoder is active during this step.)

The Film ribbon drive turns ON until the images portion of the Film is positioned before the Printhead, using the Film Print Alignment Sensor. All stop. (Note: The Film Encoder is active during this step.)

18

19

20

The Headlift Motor engages, moving Printhead down until the Headlift Sensor is activated. All stop.

Ribbon Drive, Film Ribbon Drive and Stepper all turn ON and the Printhead burns image data until the image data is depleted. All stop. (Note: The Ribbon Encoders and Film Encoders are active during this step.)

The Ribbon Drive, Film Drive and Print Platen Stepper engage until print Ribbon Encoder sees acceleration at release. (Note: The Ribbon Encoders are active during this step.)

21

The Headlift Motor engages, moving the Printhead up until the Headlift Sensor is activated. All stop. (Note: This step is not performed after the last Color/Heat Seal Panel is printed.)

22

Repeat Steps 9 to 14 for the appropriate number of color/heat seal panels.

Continued on the next page

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 1-5