10.Perform the following COPY commands, making sure that the diskette that you created in step 1 is inserted in drive A. Note that it will prompt you at each of the following files to ask if you want to perform a file overwrite; it is OK to overwrite these files.
COPY A:\NOVELL\NETWARE\NBI.NLM C:\NWSERVER COPY A:\NOVELL\NETWARE\MSM.NLM C:\NWSERVER COPY A:\NOVELL\NETWARE\TOKENTSM.NLM C:\NWSERVER COPY A:\NOVELL\NETWARE\IBMTRPO.LAN C:\NWSERVER COPY A:\NOVELL\NETWARE\IBMTRPO.LDI C:\NWSERVER
11.Go to the Novell server directory and enter server at the DOS prompt to restart the server.
12.Install the latest available Novell patches for NetWare 4.11 now. Make sure to select the Version 3.31 ODI LAN Updates for Hardware if given the opportunity.
13.Issue the down command to bring the server down.
14.Reboot the server by entering restart server.
15.Check for the following conditions to determine whether the adapter is working correctly and whether installation has been completed successfully:
v The device driver files are loading successfully. There are no error messages.
vThe adapter LEDs indicate normal operation. Green ON, Amber OFF. See “Understanding the adapter LEDs and labels” on page 43.
If you experience problems, see “Chapter 4. Problem solving” on page 37.
For information concerning NetWare Server error messages, see “Appendix E.
Novell NetWare Server messages” on page 71.
Server driver installation in existing NetWare 4.11 Server
If Novell NetWare is already installed in your computer, perform the following steps to install the adapter server device driver.
Note: If you are altering the configuration of a previously loaded adapter, unload that adapter before proceeding with these instructions.
1.Create a diskette containing the extracted files from the NETWAREP.EXE file on the adapter
2.Be sure that your adapter has already been installed in your computer. If it has not, follow the instructions in “Chapter 2. Installing the adapter hardware” on page 5.
3.Install the latest available Novell patches for NetWare 4.11. Make sure to select the Version 3.31 ODI LAN Updates for Hardware if given the opportunity. Return to the server console when the installation is complete.
4.Issue the down command from the server prompt to bring the server down.
5.Reboot the server by entering restart server.
6.Check to see if the device driver is loaded. If it is, unload it using the following command: unload ibmtrpo
7.Type load install on the server.
8.Select Driver Options.
9.Select Configure Network Drivers.
10.Select Select Drivers.
11.Press the Insert key to install the unlisted driver.