Novell NetWare 5.0 Server
If Novell NetWare is not installed on your machine, use the following instructions. If it is installed, follow the instructions in “Server driver installation in existing NetWare 5.0 Server” on page 17.
Server driver installation during NetWare 5.0 Server installation
Installation of the network board and its device driver occurs during the combined storage device and network board installation step. Use the following instructions to install the network board and its driver during a new NetWare 5.0 Server installation.
1.Create a device driver installation diskette containing the extracted files from the NETWAREP.EXE package file on the adapter
2.Select a storage device and a network board: v Select and configure the storage device.
Storage devices such as hard disks,
The installation program
vSelect and configure the network board.
The software driver for a network board is called a LAN driver. The installation program
The network board must be installed and configured correctly. For servers, it is recommended that DATARATE be set to M16 or M4, and clients be set to Auto. You might be able to influence certain network board properties by configuring the system and the network board or both.
vLoad a NetWare Loadable Module TM program, if required.
Certain server and network configurations might require you to load a NetWare Loadable Module (NLM) before you can complete the server installation. An example is loading ROUTE.NLM for a