Installing | Installation |
3.5.2 Installing the slide-in module
The server requires five height units. The sliding rails are mounted in the bottom height unit. One height unit is equal to 4.445 cm = 1 ¾ inches.
Fitting spring nuts
ca 45° |
2 |
5 |
3 |
1 |
4 |
5 |
ÊInsert the spring nuts in the corresponding groove of the support upright at the mounting points for the sliding rails and the server (1 - 4).
ÊIf necessary, adjust the position of the nuts in the groove until they lock into the correct position
(5).
17 |