System components and expansions | Accessible drives |
8.2.2 Changing the floppy disk drive
ÊShut down the operating system.
ÊSwitch off the server, and disconnect it from the network.
Switching off the server does not disconnect the device from the network. To completely
!disconnect the device from the network, remove the power plug from the line voltage.
ÊOpen the server (see "Opening and closing the server").
1 |
|
2 | 3 |
|
ÊDisconnect the cables from the floppy disk drive (1).
ÊRemove the fastening screw (2) and withdraw the floppy disk drive from the bay (3).
ÊPush the new floppy disk drive into the bay and secure it with the screw you removed earlier.
ÊConnect the cables to the floppy disk drive again.
ÊClose the server again (see "Opening and closing the server").
50 |