Fujitsu RX330 manual Server management

Page 13

Introduction

Features

Server management

Server management is implemented using theServerView software supplied combined with PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens Computers. PDA reports the threat of a system error or overload at an early stage, allowing preventive measures to be taken.

ServerView enables the management of all PRIMERGY servers in the network via a central console. The following key functions and others are supported by ServerView:

Round-the-clock monitoring, regardless of server status

High-performance, graphical console bypass (AVR) protected by HTTPS/SSL (128 bit)

Remote storage via USB

Remote power on (Wake On LAN)

Automatic switch-off when the housing is opened (Housing monitoring)

Temperature monitoring of the CPU and the surrounding area

Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R) in the event of failure of memory modules or processors

Power monitoring

End-of-life monitoring of fans with prompt notification before failure

Watchdog timer for operating system monitoring and application monitoring with ASR&R

Further information about ServerView server management is provided in the associated documentation (see “Literature” on page 87).

RX330 S1

Operating manual

13

Image 13
Contents Primergy RX330 S1 Server Copyright and Trademarks Comments… Suggestions… Corrections…Certified documentation according to DIN EN ISO Contents Contents Abbreviations Literature Index Page Documentation overview IntroductionConcept and target groups for this manual Additional server documentation Documentation overviewIntroduction FeaturesFurther sources of information System boardAccessible drives FeaturesPower supply USB portIRMC with integrated service LAN port Features Server management ServerStart Service and supportRemoteView Notational conventions Notational conventionsElectrical data hot-plug power supply unit Technical dataCompliance with regulations and standards Weight Technical dataMechanical values Ventilation clearanceInstallation steps, overview Installation steps, overview Important information SafetyInstallation and operation SafetyBefore starting up Important information Safety Laser information Working with CDs/DVDs and CD/DVD drivesNever remove parts of the CD/DVD drive casing Batteries ESD label Modules with Electrostatic-Sensitive DevicesFCC Class a Compliance Statement CE conformityCE conformity Other important informationTransporting the server Important information Environmentally-friendly product design and development Environmental protectionEnergy-saving information Packaging informationLabels on plastic casing parts Environmental protectionReturns, recycling and disposal Minimum acclimatization time Hardware installationHours Unpacking the server Unpacking the serverRack requirements Installing/removing the server in/from the rackPrimecenter Rack Installing/removing the server in/from the rackDataCenter Rack Operating manual Mechanical requirements Fitting the support bracket Installation in PRIMECENTER/DataCenter RackRemove the outer telescopic rail Operating manual Racks with installation depth of 735 mm Installation in 3rd party racksPreparing the server Inserting the serverInserting the server Hardware installation Connecting devices to the serverConnecting the keyboard, mouse and monitor Connecting devices to the serverConnecting the server to the mains Connecting the server to the mainsDisconnecting cables Connecting cablesControls and displays Starting up and operationFront of server Controls and displays Indicators on the control panelControls Starting up and operation Indicators on the drives CD/DVD indicatorLED Indicators on the HDD moduleRear of server Global error indicator and ID indicatorLAN indicators Indicators on the connection panel LAN indicatorsStatus Meaning Hot-plug PSU indicatorsSwitching the server on and off Switching the server on and offSwitching the server on System already installedSpecified switch on time / switch off time Switching the server OFFRing indicator After power failureConfiguring onboard SAS controller Configuring the serverConfiguring the server ServerStart advantages Configuration with ServerStartConfiguration without ServerStart Cleaning the serverCleaning the server Configuring onboard SAS controllerPreventing unauthorized Bios Setup calls Bios Setup security functionsPreventing unauthorized system access Property and data protectionProtecting the server from being switched off by a program Protecting Bios from being overwrittenPower-on indicator remains unlit Troubleshooting and tipsPower cable incorrectly connected Power supply overloadedScreen remains blank Server switches itself offNo screen display or display drifts Flickering stripes on monitor screenNo mouse pointer displayed on screen Mouse controller disabled System will not bootSAS configuration incorrect Incorrect date and timeError message on screen Drives reported as dead when starting systemRAID controller configuration incorrect RAID controller is not configured for this drivePage Hot-plug components Hot-plug power supply unitsRemove the dummy module Hot-plug power supply unitsHot-plug components Installing/removing the hot-plug power supply unitReplacing the hot-plug power supply unit Hot plug hard disk drives HDD module and dummy module Hot plug hard disk drivesHandling hard disk drives and HDD modules Removing the dummy module Removing/Installing the dummy moduleUnlocking the HDD module Installing/removing the HDD moduleInstalling the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Abbreviations Abbreviations IRMC LBA RAM SEL Literature Primergy ServerView Suite ServerView Literature Primergy ServerView Suite ServerView S2Primergy ServerView Suite CD-RW DVD-RW IndexDVD IndexUSB Dimensions Electrical data Index