Fujitsu RX330 manual Technical data, Mechanical values, Weight, Ventilation clearance, Noise level

Page 18

Technical data

Introduction

 

Mechanical values

 

 

 

 

 

Width

431 mm

 

 

 

 

Depth

686 mm

 

 

 

 

Height

87 mm (2 HU)

 

 

 

 

Installation depth in the

651 mm

 

rack

 

 

 

 

 

Cable depth in the rack

200.0 mm (1000 mm rack recommended)

 

 

 

 

Weight

Approx. 24 - 27 kg (depending on configuration).

Ventilation clearance

At least 200 mm on the front and rear.

Ambient conditions

Environment class 3K2

EN 60721 / IEC 721 Part 3-3

Environment class 2K2

EN 60721 / IEC 721 Part 3-2

 

 

Temperature:

 

Operation (3K2)

10 °C ... 35 °C

Transport (2K2)

-25 °C ... 60 °C

 

 

Humidity

10% ... 85%

 

 

Condensation during operation must be avoided!

Noise level

Sound power level LWAd (ISO 9296)

< 6.6

B (standby)

 

< 7.3

B (operation)

 

 

Sound pressure level at adjacent workstation

< 49 dB (A) (standby)

LpAm (ISO 9296)

< 56 dB (A) (operation)

18

Operating manual

RX330 S1

Image 18
Contents Primergy RX330 S1 Server Comments… Suggestions… Corrections… Copyright and TrademarksCertified documentation according to DIN EN ISO Contents Contents Abbreviations Literature Index Page Introduction Documentation overviewConcept and target groups for this manual Documentation overview Additional server documentationFurther sources of information FeaturesIntroduction System boardPower supply FeaturesAccessible drives USB portIRMC with integrated service LAN port Features Server management Service and support ServerStartRemoteView Notational conventions Notational conventionsTechnical data Electrical data hot-plug power supply unitCompliance with regulations and standards Mechanical values Technical dataWeight Ventilation clearanceInstallation steps, overview Installation steps, overview Safety Important informationSafety Installation and operationBefore starting up Important information Safety Working with CDs/DVDs and CD/DVD drives Laser informationNever remove parts of the CD/DVD drive casing Batteries Modules with Electrostatic-Sensitive Devices ESD labelCE conformity CE conformityFCC Class a Compliance Statement Other important informationTransporting the server Important information Energy-saving information Environmental protectionEnvironmentally-friendly product design and development Packaging informationEnvironmental protection Labels on plastic casing partsReturns, recycling and disposal Hardware installation Minimum acclimatization timeHours Unpacking the server Unpacking the serverInstalling/removing the server in/from the rack Rack requirementsInstalling/removing the server in/from the rack Primecenter RackDataCenter Rack Operating manual Mechanical requirements Installation in PRIMECENTER/DataCenter Rack Fitting the support bracketRemove the outer telescopic rail Operating manual Installation in 3rd party racks Racks with installation depth of 735 mmInserting the server Preparing the serverInserting the server Connecting devices to the server Hardware installationConnecting devices to the server Connecting the keyboard, mouse and monitorConnecting the server to the mains Connecting the server to the mainsConnecting cables Disconnecting cablesStarting up and operation Controls and displaysFront of server Indicators on the control panel Controls and displaysControls Indicators on the drives CD/DVD indicator Starting up and operationIndicators on the HDD module LEDGlobal error indicator and ID indicator Rear of serverIndicators on the connection panel LAN indicators LAN indicatorsHot-plug PSU indicators Status MeaningSwitching the server on Switching the server on and offSwitching the server on and off System already installedRing indicator Switching the server OFFSpecified switch on time / switch off time After power failureConfiguring the server Configuring onboard SAS controllerConfiguring the server Configuration with ServerStart ServerStart advantagesCleaning the server Cleaning the serverConfiguration without ServerStart Configuring onboard SAS controllerPreventing unauthorized system access Bios Setup security functionsPreventing unauthorized Bios Setup calls Property and data protectionProtecting Bios from being overwritten Protecting the server from being switched off by a programPower cable incorrectly connected Troubleshooting and tipsPower-on indicator remains unlit Power supply overloadedServer switches itself off Screen remains blankFlickering stripes on monitor screen No screen display or display driftsNo mouse pointer displayed on screen SAS configuration incorrect System will not bootMouse controller disabled Incorrect date and timeRAID controller configuration incorrect Drives reported as dead when starting systemError message on screen RAID controller is not configured for this drivePage Hot-plug power supply units Hot-plug componentsHot-plug power supply units Remove the dummy moduleInstalling/removing the hot-plug power supply unit Hot-plug componentsReplacing the hot-plug power supply unit Hot plug hard disk drives Hot plug hard disk drives HDD module and dummy moduleHandling hard disk drives and HDD modules Removing/Installing the dummy module Removing the dummy moduleInstalling/removing the HDD module Unlocking the HDD moduleInstalling the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Abbreviations Abbreviations IRMC LBA RAM SEL Literature Literature Primergy ServerView Suite ServerView S2 Primergy ServerView Suite ServerViewPrimergy ServerView Suite Index CD-RW DVD-RWIndex DVDUSB Dimensions Electrical data Index