Fujitsu RX330 manual Installation steps, overview

Page 20

Installation steps, overview

ÊConfigure the server and install the desired operating system and applica- tions. The following options are available:

–Remote configuration and installation with ServerStart:

The ServerStart disc supplied allows you to conveniently configure the server and install the operating system.

Details on how to operate ServerStart, as well as some additional infor- mation, can be found in the “PRIMERGY ServerView Suite - ServerStart” manual.

Configuration information can also be found in the “Configuration with ServerStart” on page 59 section.

–Local configuration and installation with or without ServerStart (see the “Configuration with ServerStart” on page 59 section or the “Configuration without ServerStart” on page 60 section).

IYou will find more information on installing the server remotely or locally in the ServerStart manual. This manual contains the installation steps (“Quick Step Guide”). A corresponding file in PDF format is included on the ServerBooks DVD.

20

Operating manual

RX330 S1

Image 20

Contents Primergy RX330 S1 Server Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…Copyright and Trademarks Contents Contents Abbreviations Literature Index Page Concept and target groups for this manual IntroductionDocumentation overview Documentation overview Additional server documentationFeatures IntroductionFurther sources of information System boardFeatures Accessible drivesPower supply USB portIRMC with integrated service LAN port Features Server management Service and support ServerStartRemoteView Notational conventions Notational conventions Compliance with regulations and standards Technical data Electrical data hot-plug power supply unit Technical data WeightMechanical values Ventilation clearanceInstallation steps, overview Installation steps, overview Safety Important informationBefore starting up SafetyInstallation and operation Important information Safety Never remove parts of the CD/DVD drive casing Working with CDs/DVDs and CD/DVD drivesLaser information Batteries Modules with Electrostatic-Sensitive Devices ESD labelCE conformity FCC Class a Compliance StatementCE conformity Other important informationTransporting the server Important information Environmental protection Environmentally-friendly product design and developmentEnergy-saving information Packaging informationReturns, recycling and disposal Environmental protectionLabels on plastic casing parts Hours Hardware installationMinimum acclimatization time Unpacking the server Unpacking the serverInstalling/removing the server in/from the rack Rack requirementsDataCenter Rack Installing/removing the server in/from the rackPrimecenter Rack Operating manual Mechanical requirements Installation in PRIMECENTER/DataCenter Rack Fitting the support bracketRemove the outer telescopic rail Operating manual Installation in 3rd party racks Racks with installation depth of 735 mmInserting the server Preparing the serverInserting the server Connecting devices to the server Hardware installationConnecting devices to the server Connecting the keyboard, mouse and monitorConnecting the server to the mains Connecting the server to the mainsConnecting cables Disconnecting cablesFront of server Starting up and operationControls and displays Controls Indicators on the control panelControls and displays Indicators on the drives CD/DVD indicator Starting up and operationIndicators on the HDD module LEDGlobal error indicator and ID indicator Rear of serverIndicators on the connection panel LAN indicators LAN indicatorsHot-plug PSU indicators Status MeaningSwitching the server on and off Switching the server on and offSwitching the server on System already installedSwitching the server OFF Specified switch on time / switch off timeRing indicator After power failureConfiguring the server Configuring the serverConfiguring onboard SAS controller Configuration with ServerStart ServerStart advantagesCleaning the server Configuration without ServerStartCleaning the server Configuring onboard SAS controllerBios Setup security functions Preventing unauthorized Bios Setup callsPreventing unauthorized system access Property and data protectionProtecting Bios from being overwritten Protecting the server from being switched off by a programTroubleshooting and tips Power-on indicator remains unlitPower cable incorrectly connected Power supply overloadedServer switches itself off Screen remains blankNo mouse pointer displayed on screen Flickering stripes on monitor screenNo screen display or display drifts System will not boot Mouse controller disabledSAS configuration incorrect Incorrect date and timeDrives reported as dead when starting system Error message on screenRAID controller configuration incorrect RAID controller is not configured for this drivePage Hot-plug power supply units Hot-plug componentsHot-plug power supply units Remove the dummy moduleInstalling/removing the hot-plug power supply unit Hot-plug componentsReplacing the hot-plug power supply unit Hot plug hard disk drives Hot plug hard disk drives HDD module and dummy moduleHandling hard disk drives and HDD modules Removing/Installing the dummy module Removing the dummy moduleInstalling/removing the HDD module Unlocking the HDD moduleInstalling the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Abbreviations Abbreviations IRMC LBA RAM SEL Literature Primergy ServerView Suite Literature Primergy ServerView Suite ServerView S2Primergy ServerView Suite ServerView Index CD-RW DVD-RWIndex DVDUSB Dimensions Electrical data Index