Chapter 2 Preparing to Install the Content Delivery Engines
Safety Warnings
Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units. Statement 246
Warning For Nordic countries (Norway, Finland, Sweden and Denmark) this system must be installed in a Restricted Access Location, where the voltage of the main ground connection of all equipment is the same (equipotential earth) and the system is connected to a grounded electrical outlet. Statement 328
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning Class 1 laser product. Statement 1008
Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018
Warning The
Warning To avoid electric shock, do not connect safety
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning Class 1 LED product. Statement 1027
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
|
| |
|