Cisco Systems 100/200/300/400 specifications Ethernet Port Connector, Pin T568B 100BASE-T Signal

Appendix B Connector Pin Assignments

							Ethernet Connector Pin Assignments
Table B-3		Ethernet Connector Pin Assignments for T568B (continued)
RJ-45	Wire Color		Wire Diagram		10BASE-T		1000BASE-T
Pin	(T568B)		(T568B)		100BASE-T		Signal
5	White/Blue				Unused		BI_DC–
6	Green				Receive–		BI_DB–
7	White/Brown				Unused		BI_DD+
8	Brown				Unused		BI_DD–
Table B-4		RJ-45 Crossover Cable Pin Assignments for T568B
RJ-45 Pin
End 1		Wire Color		Diagram End 1		RJ-45 Pin End 2
1		White/Orange				3
2		Orange				6
3		White/Green				1
4		Blue				7
5		White/Blue				8
6		Green				2
7		White/Brown				4
8		Brown				5

Ethernet Port Connector

The CDEs come with an integrated dual-port Ethernet controller. This controller provides an interface for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps networks and provides full-duplex (FDX) capability, which enables simultaneous transmission and reception of data on the Ethernet LAN.

To access the Ethernet port, connect a Category 3, 4, or 5 unshielded twisted-pair (UTP) cable to the RJ-45 connector on the back of the device.

Note The 100BASE-TX/1000BASE-TX Ethernet standard requires that the cabling in the network be Category 5 or higher.

Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide

OL-13478-03 B-3