A P P E N D I X B
Connector Pin Assignments
This appendix lists the connector pin assignments for the CDEs. This appendix includes the following sections:
•Serial Console Interface Connector Pin Assignments, page
•Ethernet Connector Pin Assignments, page
•Cable Pin Assignments, page
Note This appendix only provides information on CDEs that were shipped after December 1, 2006 and contain the Lindenhurst chipset. For information on CDEs that were shipped before December 1, 2006 and contain the Serverworks chipset, see Appendix C, “CDEs with Serverworks Chipset.”
Serial Console Interface Connector Pin Assignments
The serial console interface connector is a
Table |
| |||
|
|
|
|
|
Description |
| Pin | I/O | Signal Name |
|
|
|
| |
Data carrier detect; input | 1 | In | DCD | |
|
|
|
| |
Receive data; input | 2 | In | RXD | |
|
|
|
| |
Transmit data; output | 3 | Out | TXD | |
|
|
|
| |
Data terminal ready; output | 4 | Out | DTR | |
|
|
|
| |
Interface signal ground | 5 | – | GND | |
|
|
|
| |
Data set ready; input | 6 | In | DSR | |
|
|
|
| |
Ready to send; output | 7 | Out | RTS | |
|
|
|
| |
Clear to send; input | 8 | In | CTS | |
|
|
|
| |
Ring indicator; input | 9 | In | RI | |
|
|
|
|
|
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
| ||
|