Cisco Systems 100/200/300/400 specifications Set the Serial Port2 Address option to Disabled

Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE

Running the BIOS Setup Utility

Figure 4-8 Configure Super I/O Chipset Screen

Set the Serial Port2 Address option to Disabled.

Step 13 Press Esc to return to the Advanced menu. Choose Remote Access Configuration and press Enter. The Configure Remote Access Type and Parameters screen appears (see Figure 4-9).

Figure 4-9 Configure Remote Access Type and Parameters Screen

a.Set the Serial port number option to COM 1.

b.Set the Serial Port Mode option to 9600 8, n, 1.

c.Set the Redirection After BIOS POST option to Disabled.

Step 14 When you are finished, navigate to the Exit submenu and choose Save and Exit. Press OK when prompted (see Figure 4-10).

Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide

OL-13478-03 4-7